PDS_VERSION_ID                   = PDS3
RECORD_TYPE                      = STREAM

OBJECT                           = DATA_SET
DATA_SET_ID                      = "LP-L-ENG-6-COMMAND-V1.0"

OBJECT                           = DATA_SET_INFORMATION
DATA_SET_NAME                    = "LP MOON UPLINK COMMAND V1.0"
START_TIME                       = 1998-01-05
STOP_TIME                        = UNK
DATA_OBJECT_TYPE                 = "TABLE"
DATA_SET_RELEASE_DATE            = 1998-06-01
PRODUCER_FULL_NAME               = "ALAN B. BINDER"
DETAILED_CATALOG_FLAG            = "N"
DATA_SET_COLLECTION_MEMBER_FLG   = "N"
DATA_SET_DESC                    = "

Data Set Overview
=================

The command file data set contains a record of all commands sent to
the Lunar Prospector spacecraft.  The command files document any
changes in spacecraft and science instrument operating modes or other
settings.  The files are ASCII text records of the commands and
associated parameters.  A complete list of spacecraft commands can be
found in Appendix B of the Level 0 Data Product SIS, which is included
in the Lunar Prospector Level 0 Data archive.

Each file in the command data set contain uplink commands for a given
commanding session.  Such uplink sessions can occur every few days.

Science Objectives
==================

The Lunar Prospector science objectives relevant to this data set are
to map the Moon's surface composition and its magnetic field, and to
determine the frequency and location of gas release events.  A special
emphasis of the science objectives is to search for polar water ice
deposits [BINDERETAL1998].  "
 
CONFIDENCE_LEVEL_NOTE           = "
 
Confidence Level Overview
=========================

The uplink command files contain a field to indicate the status of
sending each command to the spacecraft.  The status values are
CONFIRM, ABORT, and SKIP.  Confirm indicates that the entire command
was successfully transmitted.  Abort indicates that the transmission
of the command began, but not all command bits were sent.  Skip means
that the command was never sent.

Data Coverage and Quality
=========================

Uplink commands are sent to the spacecraft on an as-needed basis.  "
 
 END_OBJECT                       = DATA_SET_INFORMATION
 
 OBJECT                           = DATA_SET_TARGET
 TARGET_NAME                      = MOON
 END_OBJECT                       = DATA_SET_TARGET
 
 OBJECT                           = DATA_SET_HOST
 INSTRUMENT_HOST_ID               = LP
 INSTRUMENT_ID                    = ENG
 END_OBJECT                       = DATA_SET_HOST
  
 OBJECT                           = DATA_SET_REFERENCE_INFORMATION
 REFERENCE_KEY_ID                 = "BINDERETAL1998"
 END_OBJECT                       = DATA_SET_REFERENCE_INFORMATION
  
END_OBJECT                        = DATA_SET
END