PDS_VERSION_ID     = PDS3
RECORD_TYPE        = STREAM
OBJECT             = TEXT
  PUBLICATION_DATE = 1999-12-06
  NOTE             = "Description of PEDR2TAB software provided with 
    the MGS MOLA archive volumes"
END_OBJECT         = TEXT
END

FILES IN THIS DIRECTORY
-----------------------

P2TINFO.TXT - The file you are reading.

PEDR2TAB.F - Fortran source code for PC/Windows platforms. Variants
 for other architectures are available on the MOLA website,
 http://ltpwww.gsfc.nasa.gov/tharsis/software.html.

PEDR2TAB.PRM - Preferences file read by PEDR2TAB, to be edited by user

PEDR2TAB.EXE - Executable program, compiled under MS-DOS/Windows 95

MOLA.LBL - Example of a PDS label for a file produced by PEDR2TAB


PEDR2TAB SOFTWARE FOR MGS MOLA ARCHIVE VOLUMES
----------------------------------------------

PEDR2TAB is a program that reads MOLA PEDR files and produces an ASCII
table of selected fields, one line for each altimetry shot
detected. The user may choose to see all ranges, or only those that
are/are not ground hits, in a selected region. The user may output any
of eight groups of MOLA instrument values. By default, topography,
range, planetary radius, and flags are output. The program is written
in Fortran 77 with MIL-STD-1753 and other extensions.

The user should modify the preferences file, PEDR2TAB.PRM, to select
the groups of values to be written to the output file.  A group is
selected by placing a T (for True) at the beginning of the line that
describes the desired group.  Lines that begin with F (False) will not
be selected for output.

By default, the program writes an ASCII table to a file named
MOLA.TAB.  The file MOLA.LBL can be used as the basis for a PDS label
that describes MOLA.TAB. MOLA.LBL describes all possible fields that
can be output.  In order for MOLA.LBL to be valid for a particular
output file, it must be edited to reflect the user's selections in
PEDR2TAB.PRM.

To run the program, use the command

   PEDR2TAB pedr-file

where "pedr-file" is the name of a binary PEDR data file,
e.g. ap00213k.b.  If the file name is omitted, the program will prompt
for it.

Alternatively, the program can search several PEDR files for frames in
the selected region, generating either a single output file or
separate files by the same name with a suffix ".TAB". To do this, use
the command

   PEDR2TAB pedr-file-list

or when prompted, enter the name of a file that contains a list of the
PEDRs to be searched, one PEDR name per line. The names must terminate
with the extension ".b" or ".B" to be recognized.  The output file
extension ".TAB" may be customized in PEDR2TAB.PRM.

PEDR2TAB was written by Gregory Neumann, MOLA Science Team,
NASA/Goddard Space Flight Center. Although the software contained
herein has been tested, no warranty, expressed or implied, is made by
NASA, the Jet Propulsion Laboratory (JPL), or the Goddard Space Flight
Center (GSFC), as to the accuracy and functioning of the software and
related materials, and no responsibility is assumed by NASA, JPL, or
GSFC. This software is not supported by the MOLA Instrument and
Science Teams.  The PEDR Software Interface Specification 2.7 is the
authoritative document, and should be consulted if questions arise.
If you have any comments, improvements, or bug reports, please send
email to Gregory.Neumann@gsfc.nasa.gov.