PDS_VERSION_ID = PDS3 RECORD_TYPE = STREAM START_TIME = 1997-09-12T00:00:00 STOP_TIME = 1999-03-27T23:59:59 DATA_SET_ID = "MGS-M-RSS-5-SDP-V1.0" INSTRUMENT_HOST_NAME = "MARS GLOBAL SURVEYOR" TARGET_NAME = MARS ^LATEX_DOCUMENT = "AAS99328.TEX" ^PS_DOCUMENT = "AAS99328.PS" DESCRIPTION = " This PDS document is a description of the methods used and results obtained in analyzing radio tracking data from the Mars Global Surveyor spacecraft while it orbited Mars during selected periods from 1997 to 1999. The paper was presented to the Astrodynamics Specialist Conference, Girdwood, Alaska, 16-19 August 1999. Authors: F.G. Lemoine, D.D. Rowlands, D.E. Smith, D.S. Chinn, D.E. Pavlis, S.B. Luthcke, G.A. Neumann, and M.T. Zuber. Title: Orbit Determination for Mars Global Surveyor During Mapping. The abstract reads: The Mars Global Surveyor (MGS) spacecraft reached its designated low-altitude, and near-circular orbit about Mars after termination of aerobraking on February 4, 1999. The Mars Orbiter Laser Altimeter (MOLA) returned its first data from this low-altitude orbit on March 1, 1999. The Doppler data acquired from the Deep Space Network were used to determine the orbit of the MGS spacecraft, so that the altimeter data could be used to map the topography of Mars. A detailed nonconservative force model was implemented for MGS that included articulation of the solar arrays. The tracking data in February and March 1999 were used to improve the knowledge of the Mars geopotential by developing MGM0964C20, a solution to 70x70 in spherical harmonics. When the improved nonconservative force model and the improved Mars gravity model, MGM0964C20, are applied in the MGS orbit determination during the mapping orbit, the overlaps of adjacent arcs in March 1999 show a consistency of 0.6 m in the radial direction, and 2 meters in total position. We demonstrate that altimeter crossovers from MOLA can be used to further improve the orbit determination for these arcs resulting in an orbit overlap consistency of 0.3 meters in the radial direction and 1.7 meters in total position. The document is presented in two formats: a PostScript file with figures and a LaTeX file of text only. LaTeX is a document preparation system developed by Leslie Lamport; it is a collection of TeX modules. TeX is a document preparation system developed by Donald Knuth. For further information, see books such as 'LaTeX Line By Line' by Antoni Diller (John Wiley and Sons, 1993, 291 p.). 'PostScript' is a trademark of Adobe Systems Incorporated." OBJECT = LATEX_DOCUMENT DOCUMENT_NAME = "MGS ORBIT DETERMINATION - LATEX FORMAT" PUBLICATION_DATE = 1999-08-16 DOCUMENT_TOPIC_TYPE = "GRAVITY FIELD DERIVATION" INTERCHANGE_FORMAT = ASCII DOCUMENT_FORMAT = TEXT FILES = 1 DESCRIPTION = " LaTeX version of a paper describing analysis of radio tracking and altimetry data from Mars Global Surveyor in 1997-1999. This is a single file with name AAS99328.TEX containing text only (no figures) for the paper presented at the Astrodynamics Specialists Conference. On some systems the characters in the extension will have to be converted to lower case before the LaTeX software will work. If the programs latex and dvips are available, the user should type the following commands: latex AAS99328 dvips -o AAS99328.ps AAS99328.dvi lpr AAS99328.ps Users without these programs should consult a system administrator for advice on converting the LaTeX files. The LaTeX file contains an unknown number of variable-length lines of readable and printable ASCII characters. Lines are delimited by the ASCII carriage-return (ASCII 13) line-feed (ASCII 10) pair." END_OBJECT = LATEX_DOCUMENT OBJECT = PS_DOCUMENT DOCUMENT_NAME = "MGS ORBIT DETERMINATION - POSTSCRIPT FORMAT" PUBLICATION_DATE = 1999-08-16 DOCUMENT_TOPIC_TYPE = "GRAVITY FIELD DERIVATION" INTERCHANGE_FORMAT = BINARY DOCUMENT_FORMAT = "POSTSCRIPT" FILES = 1 DESCRIPTION = " PostScript version of a paper describing analysis of radio tracking and altimetry data from Mars Global Surveyor in 1997-1999. This is a single file with name AAS99328.PS containing both text and figures for the paper presented at the Astrodynamics Specialists Conference. The PostScript file contains an unknown number of variable-length lines of readable and printable ASCII characters. Lines are delimited by the ASCII carriage-return (ASCII 13) line-feed (ASCII 10) pair. Pagination is from front to back." END_OBJECT = PS_DOCUMENT END