STATUS: DONE

Previous sequence 51010C will nominally be aborted at command [10264]

MISSION SEQUENCE PLANNER REPORT

SEQUENCE DESCRIPTION

• Sol 12 Scenario

• Sequence 51210B (.pef file, viewable as text)
• Command-by-Command Description* (w/telemetry estimate)

• Roverview Traverse Graphic

• Vehicle Positions:

  	X Position (m)	Y Position (m)	Heading (deg)
  At Sequence Start**	4.335	-3.242	205
  At End of Sol 12* (predicted)	3.259	-1.349	60.0

  ** Vehicle positions are in surface-fixed frame
  * at completion of planned SOL's traverse activities assuming nominal execution

• Pointing for IMP Images of Rover:

  Image Type	X (m)	Y (m)	Z (m)	Imaging Opportunity
  End-of-Day Ops	3.998	-1.418	0.20
  End-of-Day Ops	3.595	-2.239	0.20
  End-of-Day Ops	3.145	-2.944	0.20
  End-of-Day Ops	5.860	-5.499	0.20

  
  Request four stereo pairs

• Telemetry Volume Estimates

  • Sol 12 Downlink (by APID)
    Predicted telemetry volume generated between activation of sequence 51210B from nominal start to nominal abort [12123]

    Command Range Processed: First Command:[12001] Time Executed: 1247717887 197 04:18:00 07:01:46 Final Command:[12123] Time Executed: 1247815927 198 07:32:02 09:32:02 SUMMARY BY TELEMETRY APID:

    APID	Name	Predicted #Pkts	Predicted #Mbits
    4	Health Status	66	0.15365
    5	Ops/Engr	65	0.03815
    6	Sequence Status	3	0.00094
    7	Error Reports	0	0.00000
    8	Science Imaging	0	0.00000
    9	Technology Imaging	0	0.00000
    10	Lander Imaging	0	0.00000
    12	APXS Results	0	0.00000
    23	Priority Ops/Engr.	0	0.00000
    24	Auto Imaging	0	0.00000
    25	Ops Imaging	96	1.25194
    29	Traverse Reporting	12	0.14893
    	TOTAL	242	1.59361

  • 51210B Full Sequence until Nominal Abort (by APID)
  • 51210B RAIF Comment List (comments appear as skipped commands in telemetry stream)

  • 51210B Full Sequence Summary for PLAN-IT

SEQUENCE IMPLEMENTATION REPORT

• SEQUENCE EXECUTION ISSUES:

• SEQUENCE PLAN ASSESSMENT:
  Recommendations for Downlink Assessment Team
  1. None
  Flight Rules Waived:
  1. None
  Macros Modified:
  1. None
  Incorporation of EAT Operational Constraints (this sequence) (Copied from Sol 11 downlink report)

  RECOMENDATION:

  Proceed with nominal sequence for either APXS measurement or traverse
  Operational Constraints
  1. Insert longer wait (60 seconds) between APXS cycle start command and APXS turn-off command (turn off devices)
  2. See Navigation and Control Detailed Report (near end of this report) for operational constraints for planned Yogi-egress and traverse
  3. Disable auto shutdown (to limit battery usage).
  4. Set Modem Heat to 10 minutes.
  5. Set Modem Reheat to 5 minutes.
  6. Set alarm based wakeup on morning of Sol 12 for 07:00 LST
  7. Perform Read Memory just before last downlink session on SOL 12
  8. Force Fail Z accelerometer
  9. Force Fail Y accelerometer
  10. Do NOT change X accelerometer failure counter (i.e., leave enabled)
  11. Disable Auto-Heat WEB
  12. Perform Time Sync just prior to EOD shudown.
  13. No WEB heating required overnight
  Engineering Request
  1. Install APIDs 6 and 7 in the DPT as highest priority
  Operational Constraints (General)
  1. Perform WEB heating on days of low activity (i.e. no traverses) from 12:00 (noon) to 15:00 MLST with temperature setting at 30 deg

  Incorporation of Operational Constraints
  1. All taken into consideration