PDS_VERSION_ID = PDS3 LABEL_REVISION_NOTE = "M.K. Gordon, 2013-02-28, M.K. Gordon, 2019-04-30 updated for version 2.0 20190719 RChen/EN superseded" RECORD_TYPE = STREAM OBJECT = DATA_SET DATA_SET_ID = "CO-SR-UVIS-2/4-OCC-V2.0" OBJECT = DATA_SET_INFORMATION DATA_OBJECT_TYPE = "SERIES" DATA_SET_COLLECTION_MEMBER_FLG = "N" DATA_SET_NAME = " CASSINI ORBITER SATURN UVIS STELLAR RING OCC 2004-2017" DATA_SET_RELEASE_DATE = 2019-05-03 DATA_SET_TERSE_DESC = "Cassini UVIS derived, stellar occultation, radial profiles of the rings of Saturn - Version 2." DETAILED_CATALOG_FLAG = "N" PRODUCER_FULL_NAME = "MITCHELL K. GORDON" START_TIME = 2004-10-06T16:33:30 STOP_TIME = 2017-08-16T18:35:55 ABSTRACT_DESC = "This data set contains derived radial occultation profiles of the rings of Saturn based on stellar occultation observations made with the Cassini UVIS instrument between October 2004 and August 2017." CITATION_DESC = " Colwell, J.E., R.G. Jerousek, T.M. Becker, and L.W. Esposito, CASSINI ORBITER SATURN UVIS RING STELLAR OCCULTATIONS 2.0, CO-SR-UVIS-HSP-2/4-OCC-V2.0, NASA Planetary Data System, 2019." ARCHIVE_STATUS = SUPERSEDED DATA_SET_DESC = " Data Set Overview ================= This data set contains derived radial occultation profiles of the rings of Saturn based on stellar occultation observations made with the Cassini UVIS instrument between October 2004 and August 2017. Version 1.0 Contains derived radial occultation profiles of the rings of Saturn based on stellar occultation observations made with the Cassini UVIS instrument between May 2005 and August 2008. Version 2.0 Contains derived radial occultation profiles of the rings of Saturn based on stellar occultation observations made with the Cassini UVIS instrument between October 2004 and August 2017. Geometric calculations were based on the final (post mission) NAIF kernel files. All previously archived profiles were reprocessed for inclusion in the Version 2.0 delivery. With version 2.0, the columns in the data table files were reordered slightly, and an additional column, OBSERVED RING AZIMUTH, was added. Definitions of all of the ring specific keywords and columns may be found in Occultation_keywords_v1.3.pdf in the document subdirectory. Added additional documentation files. Processing ========== High. Limitations encountered in the data and the processing are detailed in Colwell etal. 2010 (COLWELLETAL2010)." CONFIDENCE_LEVEL_NOTE = " Confidence Level Overview ========================= The data have been processed and reviewed by members of the UVIS team. Limitations encountered in the data and the processing are detailed in Colwell etal. 2010 (COLWELLETAL2010). Review ====== This data set has completed a PDS Peer Review. Contact Information =================== For questions concerning this data set contact: Mitch Gordon PDS Rings Node SETI Institute 189 Bernardo Ave. Mountain View, CA 94043 Phone: 276-393-8822 Email: mgordon@seti.org Josh Colwell University of Central Florida Department of Physics 4000 Central Florida Blvd Orlando, FL 32816-2385 Phone: 407-823-2012 Email: jcolwell@physics.ucf.edu " END_OBJECT = DATA_SET_INFORMATION OBJECT = DATA_SET_TARGET TARGET_NAME = "S RINGS" END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_MISSION MISSION_NAME = "CASSINI-HUYGENS" END_OBJECT = DATA_SET_MISSION OBJECT = DATA_SET_HOST INSTRUMENT_HOST_ID = CO INSTRUMENT_ID = UVIS END_OBJECT = DATA_SET_HOST OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "COLWELLETAL2010" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "COLWELLETAL2018" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "JEROUSEKETAL2016" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "BECKER2018" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "BAILLIEETAL2013" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "BAILLIEETAL2011" END_OBJECT = DATA_SET_REFERENCE_INFORMATION END_OBJECT = DATA_SET END