PDS_VERSION_ID = PDS3 RECORD_TYPE = "STREAM" LABEL_REVISION_NOTE = "2007-05-16 LDP:D.Han Created. 2008-08-25 LDP:McLaughlin Resolved liens from the Dec 2007 peer review. 2008-10-16 GEO:Slavney Corrected reference key ID APOLLO12A1970. 2020-09-18 GEO:White Added authors." OBJECT = DATA_SET DATA_SET_ID = "A12A-L-SWS-4-SOLAR-WIND-1HR-AVG-V1.0" OBJECT = DATA_SET_INFORMATION DATA_SET_NAME = "APOLLO 12 ALSEP/SWS SOLAR WIND 1-HR AVG TABLES V1.0" DATA_SET_COLLECTION_MEMBER_FLG = "N" DATA_OBJECT_TYPE = "TABLE" START_TIME = 1969-11-19T19:30:00 STOP_TIME = 1976-03-25T08:30:00 DATA_SET_RELEASE_DATE = 2007-06-29 ARCHIVE_STATUS = "LOCALLY ARCHIVED" PRODUCER_FULL_NAME = {"DAVID WILLIAMS", "CONWAY SNYDER", "MARCIA NEUGEBAUER", "DOUGLAS CLAY", "H. K. HILLS"} DETAILED_CATALOG_FLAG = "N" DATA_SET_TERSE_DESC = "Tables of time ordered, hourly-averaged measurements of solar wind plasma on the Moon acquired by the Apollo 12 Solar Wind Spectrometer from 19 November 1969 through 25 March 1976." ABSTRACT_DESC = "This data set contains tables of time ordered, hourly-averaged plasma parameters, mainly of the solar wind, as observed on the Moon at the Apollo 12 ALSEP site by the Apollo 12 Solar Wind Spectrometer from 19 November 1969 through 25 March 1976." CITATION_DESC = "Snyder, C.W., Neugebauer, M.M, D.R. Clay, D.R. Williams, and H.K. Hills APOLLO 12 ALSEP/SWS SOLAR WIND 1-HR AVG TABLES V1.0, A12A-L-SWS-4-SOLAR-WIND-1HR-AVG-V1.0, NASA Planetary Data System, 2007." DATA_SET_DESC = " Data Set Overview ================= This data set contains tables of time ordered, hourly-averaged plasma parameters, mainly of the solar wind, as observed on the Moon at the Apollo 12 ALSEP site by the Apollo 12 Solar Wind Spectrometer (SWS) from 19 November 1969 through 25 March 1976. Data ==== The hourly averaged SWS data tables are in fixed-width ASCII format. There is one table for each year the SWS recorded data. Each table provides four sets of computed hourly parameters using as input data: (1) all fine-time scale parameters (FTSP), (2) all FTSP computed from spectra with small root-mean-square (RMS) error on curve fitting and thermal speeds less than one-half the bulk velocity, (3) all FTSP computed from spectra that satisfy the requirements of criterion 2 as well as having only one flow angle that can be directly measured, and (4) all FTSP computed from spectra that satisfy the requirements of criterion 2 as well as having both flow angles directly measurable. Contained in each of the four sets of averages are the proton density, alpha-to-proton ratio, bulk speed, angle of flow, number of spectra, and RMS deviations of each average. These data tables were converted from the CDF format which was created from the original binary data set PSFP-00117 by the NSSDC as part of the Lunar Data Restoration project. The original tapes were written in BCD format on a UNIVAC 1108 computer. See Clay, et al. (1975) [CLAYETAL1975], Goldstein, et al. (1973) [GOLDSTEINETAL1973], Neugebauer, et al. (1972) [NEUGEBAUERETAL1972], and Snyder, et al. (1970) [SNYDERETAL1970] for more information about the SWS plasma data from Apollo 12. This data set description was provided by the NSSDC. " CONFIDENCE_LEVEL_NOTE = " Confidence Level Overview ========================= These data tables are restorations of the original binary data recorded by the SWS experiment and were reviewed internally at the NSSDC for accuracy and completeness. Review ====== This data set was peer-reviewed in December 2007 and was accepted for the PDS archive pending the resolution of liens (completed in August 2008). " END_OBJECT = DATA_SET_INFORMATION OBJECT = DATA_SET_TARGET TARGET_NAME = "MOON" END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_HOST INSTRUMENT_HOST_ID = "A12A" INSTRUMENT_ID = "SWS" END_OBJECT = DATA_SET_HOST OBJECT = DATA_SET_MISSION MISSION_NAME = "APOLLO 12" END_OBJECT = DATA_SET_MISSION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "APOLLO12A1970" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "BATESETAL1979" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "CLAYETAL1975" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "GOLDSTEINETAL1973" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "NEUGEBAUERETAL1972" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "SNYDERETAL1970" END_OBJECT = DATA_SET_REFERENCE_INFORMATION END_OBJECT = DATA_SET END