PDS_VERSION_ID = PDS3 LABEL_REVISION_NOTE = "2020-10-19 GEO:White" OBJECT = DATA_SET DATA_SET_ID = "FEXP-E-SHYG-3-RDR-OPT-DEP-V1.0" OBJECT = DATA_SET_INFORMATION DATA_SET_NAME = "FIELD EXP E SHYG CALIBRATED RDR OPTICAL DEPTH V1.0" DATA_OBJECT_TYPE = TABLE START_TIME = 1989-09-29 STOP_TIME = 1989-09-29 DATA_SET_RELEASE_DATE = 1991-05-28 DETAILED_CATALOG_FLAG = "N" DATA_SET_COLLECTION_MEMBER_FLG = "N" ARCHIVE_STATUS = ARCHIVED PRODUCER_FULL_NAME = "CAROL J. BRUEGGE" DATA_SET_TERSE_DESC = "The Spectral Hygrometer Archive contains calibrated reduced data records (RDRs) acquired by Spectral Hygrometers during the earth-based 1989 Geologic Remote Sensing Field Experiment (GRSFE)." CITATION_DESC = "Bruegge, C. J., FIELD EXP E SHYG CALIBRATED RDR OPTICAL DEPTH V1.0, FEXP-E-SHYG-3-RDR-OPT-DEP-V1.0, NASA Planetary Data System, 1991." ABSTRACT_DESC = "Spectral hygrometer (SHYG) data were gathered on September 29, 1989 at Lunar Lake. The spectral hygrometer provided the ratio Rsh=L(935)/L(880), where L(935) is the radiance at 935 nm. The measurement is acquired by aiming the optics at the sun. The Spectral Hygrometer data files consist of data acquired on September 29, 1989. Columns are time in PDT, ratio of L(935) / L(880) for instrument SH015, time in PDT and corresponding ratio for instrument SH004." DATA_SET_DESC = " Data Set Overview ================= Spectral hygrometer (SHYG) data were gathered on September 29, 1989 at Lunar Lake. The spectral hygrometer provided the ratio Rsh=L(935)/L(880), where L(935) is the radiance at 935 nm. The measurement is acquired by aiming the optics at the sun. The Spectral Hygrometer data files consist of data acquired on September 29, 1989. Columns are time in PDT, ratio of L(935) / L(880) for instrument SH015, time in PDT and corresponding ratio for instrument SH004. The conversion from spectral hygrometer ratio to column water abundance was calibrated prior to GRSFE for column water abundance using more than 100 radiosonde observations. The line of sight precipitable water, WLOS, in centimeters, is: WLOS = W + (W/6.8)**3, where: W = 13.7/((10**1.38)*Rsh). The uncertainty is +/- 10%. To adjust the expression for site elevation: WLOS(corr) = WLOS * SQRT (P0/P), where P0 = pressure at sea level and P = pressure at site elevation. Processing Level Id : 3 Software Flag : N Processing Start Time : 1989-08-10T00:00:00.000 Processing Stop Time : 1989-10-05T00:00:00.000 Parameters ========== Data Set Parameter 'RADIANCE' ----------------------------- Radiance is the amount of energy per time per projected area per steradian. Data Set Parameter Name : RADIANCE Data Set Parameter Unit : N/A Sampling Parameter Name : WAVELENGTH Sampling Parameter Unit : NANOMETER Minimum Sampling Parameter : 880 Maximum Sampling Parameter : 935 Sampling Parameter Resolution : N/A Sampling Parameter Interval : N/A Minimum Available Sampling Int : N/A Noise Level : N/A Source Instrument Parameters ============================ Instrument Host ID : FEXP Data Set Parameter Name : RADIANCE Instrument Parameter Name : RADIANCE Important Instrument Parameters : 1 Measurement Information ======================= Atmospheric Conditions ---------------------- Not Applicable Source ------ The solar irradiance is the source of the energy measured by the instrument. Calibration Standard -------------------- Not Applicable Wavelength Calibration ---------------------- Not Applicable Processing ========== Processing History ------------------ Source Data Set ID : N/A Software : UNK Product Data Set ID : FEXP-E-SHYG-3-RDR-OPT-DEP-V1.0 " CONFIDENCE_LEVEL_NOTE = " Overview ======== The measurements were calibrated for column water abundance using more than 100 radiosonde observations. " END_OBJECT = DATA_SET_INFORMATION OBJECT = DATA_SET_TARGET TARGET_NAME = EARTH END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_HOST INSTRUMENT_HOST_ID = FEXP INSTRUMENT_ID = SHYG END_OBJECT = DATA_SET_HOST OBJECT = DATA_SET_MISSION MISSION_NAME = "GEOLOGIC REMOTE SENSING FIELD EXPERIMENT" END_OBJECT = DATA_SET_MISSION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "N/A" END_OBJECT = DATA_SET_REFERENCE_INFORMATION END_OBJECT = DATA_SET END