PDS_VERSION_ID = PDS3 /* Version 3.8 February 27, 2009 */ RECORD_TYPE = STREAM LABEL_REVISION_NOTE = " 2017-05-20 JUNO: Janssen Revision 1; 2020-05-10 JUNO: Sarkissian Revision 2; 20220927 RChen/EN aRCHIVE_STATUS changed to SUPERSEDED" OBJECT = DATA_SET DATA_SET_ID = "JNO-J-MWR-3-RDR-V2.0" OBJECT = DATA_SET_INFORMATION DATA_SET_NAME = " JUNO JUPITER MWR REDUCED DATA RECORDS V2.0" DATA_SET_COLLECTION_MEMBER_FLG = "N" DATA_OBJECT_TYPE = FILE ARCHIVE_STATUS = SUPERSEDED START_TIME = 2016-07-06T20:00:00 STOP_TIME = NULL DATA_SET_RELEASE_DATE = NULL PRODUCER_FULL_NAME = "DR. MICHAEL A. JANSSEN" DETAILED_CATALOG_FLAG = "N" DATA_SET_TERSE_DESC = " The Juno MWR RDR data set in this volume includes calibrated MWR science data records from the Jupiter phase of the Juno mission." ABSTRACT_DESC = " The Juno MWR RDR data sets will ultimately include all calibrated MWR science data records for the entire Juno mission. The set in this volume will contain only those data obtained during the orbital phase of the Juno mission, when this phase of the mission is completed. The RDR science records have a one-to-one correspondence with the EDR records." CITATION_DESC = "Janssen, M.A., JUNO JUPITER MWR REDUCED DATA RECORDS V2.0, JNO-J-MWR-3-RDR-V2.0, NASA Planetary Data System, 2020." DATA_SET_DESC = " Data Set Overview ================= The Juno MWR RDR data sets will ultimately include all calibrated MWR science data for the entire Juno mission. This volume will contain only those data obtained through the orbital phase of the Juno mission, when this phase of the mission is completed. These data comprise the calibrated and geolocated data that address the primary objectives of the Juno mission. They consist of data obtained at the full MWR data rate during a five-hour period around each perijove pass, and data obtained at all other times for the purpose of instrument calibration and performance monitoring. This volume contains all instrumental data required for further processing to achieve the scientific objectives of the Juno mission. The RDR files are of two types: Instrument Reduced Data Records (IRDRs), and Geolocation Data Records (GRDRs). These have a one-to-one correspondence with each other as well as with the EDR files. These files comprise the data of primary usefulness to the wider scientific community. Parameters ========== The fundamental unit of this data set comprises the data obtained during a single 100-ms observation made by the MWR instrument. Each observation includes all of the MWR instrument parameters required for its calibration, which have been interpolated from neighboring records in the original EDRs. Processing ========== The data included in this volume set were processed by the RDR processing pipeline as described in section 2.3 of the VOLSIS document found under the DOCUMENTS subdirectory. In short, this segment of the pipeline consists of programs which interpolate the instrument parameters in the EDR records required for the calibration of each record, and then performs that calibration to produce the IRDRs. The SPICE toolkit and Juno mission SPICE kernels from the Navigation and Ancillary Information Facility (NAIF) are then used to produce the associated GRDRs. Data ==== Products in this data set consist of files of time-ordered data corresponding to observations of 100-ms duration each. These are received from the instrument in time-contiguous units of ten observations each, with one unit then corresponding to one second's worth of observation. Successive units may be contiguous in time (full data rate) or separated by n seconds each (reduced data rate). These units are then assembled into contiguous files of one hour length regardless of data rate. Each IRDR and GRDR file has its associated label file, which in total comprise one data record. The details of the collection and formatting of these files is described in Sections 2 and 3, and in Appendix B, of the VOLSIS document found under the DOCUMENTS subdirectory. Ancillary Data ============== This data set is complete and requires no further data to produce calibrated antenna temperatures. However, antenna pattern knowledge is required for use in an antenna pattern correction to produce calibrated brightness temperatures. Coordinate Systems ================== Coordinate systems are consistent with those used in SPICE. The instrument coordinant system is further described in section 2.4.6 of the VOLSIS document found under the DOCUMENTS subdirectory. The GRDR locations use the j2000 and galactic coordinant systems found in SPICE. Software ======== No software is provided to view, interpret, or convert this data set. All files are in ASCII format, however, and are readily readible through standard programs such as textedit, Microwave Excel and Word, etc. Media/Format ============ This data set is provided to the Planetary Data System by the Juno Science Operation Center (JSOC) as described in section 5.2 of the VOLSIS document found under the DOCUMENTS subdirectory." CONFIDENCE_LEVEL_NOTE = " Confidence Level Overview ========================= This data set contains all instrument packets for the Juno MWR experiment for the interval described in the labels for the individual product files. Every effort has been made to ensure that all data returned to the Juno Science Operations Center from the spacecraft are included, even those packets which fail checksum tests. Review ====== The MWR calibrated complete data will be reviewed internally by the Juno MWR instrument team prior to release to the PDS. The data set will also be reviewed by the PDS. Data Coverage and Quality ========================= TBD Limitations =========== Limitations on the data set may be defined as the MWR team gains experience operating the instrument in flight conditions. No limitations are presently known." END_OBJECT = DATA_SET_INFORMATION OBJECT = DATA_SET_TARGET TARGET_NAME = "JUPITER" END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_TARGET TARGET_NAME = "SKY" END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_HOST INSTRUMENT_HOST_ID = "JNO" INSTRUMENT_ID = "MWR" END_OBJECT = DATA_SET_HOST OBJECT = DATA_SET_MISSION MISSION_NAME = "JUNO" END_OBJECT = DATA_SET_MISSION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "NULL" END_OBJECT = DATA_SET_REFERENCE_INFORMATION END_OBJECT = DATA_SET END