PDS_VERSION_ID = PDS3 LABEL_REVISION_NOTE = " 2024-12-30 Initial Version. 2025-06-30 Perijoves 36-67 version; 2025-07-11 PPI:kazden, perijoves 68-71 update;" RECORD_TYPE = STREAM OBJECT = DATA_SET DATA_SET_ID = "JNO-J-ASC-3-RAD-V1.0" OBJECT = DATA_SET_INFORMATION DATA_SET_NAME = "JUNO JUP ASC CALIBRATED RADIATION FLUX V1.0" DATA_SET_COLLECTION_MEMBER_FLG = N START_TIME = 2021-07-20T08:14:53 STOP_TIME = 2025-04-04T10:15:57.609 DATA_SET_RELEASE_DATE = 2025-07-11 PRODUCER_FULL_NAME = "TROELZ DENVER" DETAILED_CATALOG_FLAG = N DATA_OBJECT_TYPE = "TABLE" DATA_SET_TERSE_DESC = " This data set contains calibrated radiation flux data obtained by analysis of hotspot counts on the Juno Advanced Stellar Compass (ASC) Camera Head Unit (CHU) Charge Coupled Devices (CCD). " CITATION_DESC = " Jorgensen, J.L., Benn, M., Denver, T., Herceg, M., Connerney, J.E.P., JUNO JUP ASC CALIBRATED RADIATION FLUX V1.0, JNO-J-ASC-3-RAD-V1.0, NASA Planetary Data System, 2024. DOI: 10.17189/hjep-0v91" ABSTRACT_DESC = " This data set contains calibrated radiation flux data obtained by analysis of hotspot counts on the Juno Advanced Stellar Compass (ASC) Camera Head Unit (CHU) Charge Coupled Devices (CCD). " DATA_SET_DESC = " Data Set Overview ================= This data set contains calibrated radiation flux data obtained by analysis of hotspot counts on the Juno Advanced Stellar Compass (ASC) Camera Head Unit (CHU) Charge Coupled Devices (CCD). The radiation count data is confined to the orbital period, where JUNO is in proximity to Jupiter. The data span a period from 24h before to 24h after the perijove, i.e. spanning a total of 48h. One radiation count data product is produced for each perijove passage and is contained within a single ASCII file. An associated label file describes details of the radiation count product. The naming of the radiation count file is described below. The naming of the label file is the name of the radiation count file with the extension replaced by an '.lbl' file extension. Processing ========== Before forwarding the data to PDS, the following pre-processing is performed: - Filtering: Data samples that are impaired by other operation, e.g. saturation or incorrectly set dark level clamping, are suppressed from the dataset - Calibration: The radiation count data is converted to engineering units, calibrated for count statistics effect, shutter usage etc. - Flux calibration: The engineering count units are converted to external omni-directional flux by compensating for sensor sensitivity and shielding attenuation. References ========== Connerney, J.E.P., M. Benn, J.B. Bjarno, T. Denver, J. Espley, J.L Jorgensen, P.S. Jorgensen, P. Lawton, A. Malinnikova, J.M. Merayo, S. Murphy, J. Odom, R. Oliversen, R. Schnurr, D. Sheppard, and E.J. Smith, The Juno Magnetic Field Investigation, Space Science Reviews, 213, 39-138, 2017, doi: 10.1007/s11214-017-0334-z. Denver, T., J. Sushkova, J.L. Jorgensen, L. Ghizoni, M. Herceg, C. Toldbo, M. Benn, P.S.Jorgensen, R. Fleron, J.E.P. Connerney, H.N. Becker, S.J. Bolton, The Juno ASC as an Energetic Particle Counter, Space Sci Rev 220, 86 (2024). doi: 10.1007/s11214-024-01120-y. " CONFIDENCE_LEVEL_NOTE = " Review ====== These data have been reviewed by the instrument team and are of the highest quality that can be generated at this time. After submission to the PDS, these data underwent the peer review process. Review liens were verified and the data certified on 4 Apr 2023. Limitations =========== None known as yet. " END_OBJECT = DATA_SET_INFORMATION OBJECT = DATA_SET_TARGET TARGET_NAME = "JUPITER" END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_HOST INSTRUMENT_HOST_ID = "JNO" INSTRUMENT_ID = "ASC" END_OBJECT = DATA_SET_HOST OBJECT = DATA_SET_MISSION MISSION_NAME = "JUNO" END_OBJECT = DATA_SET_MISSION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "CONNERNEYETAL2017" END_OBJECT = DATA_SET_REFERENCE_INFORMATION OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "DENVERETAL2024" END_OBJECT = DATA_SET_REFERENCE_INFORMATION END_OBJECT = DATA_SET END