Data directory: 2014-04-02-10.06.52-37087-STS_exo_L3A_3x5x10_v01_Rev324
Generated from Spacecraft Telemetry Files.
Original Comments:  GSE Comments: Data directory: NMS_SCIENCE/
CDH	FM	0	0.0
LSIM	FM	0	0.0
PS	FM	0	0.0
FB	FM	0	0.0
PROM Ver.	Jr
GSE:.	Revision: 1.0
Test temp.:.	Extremely mild
Note:	This file was created by ccsds2tm.
G%packet 2
Sv
00000: LADEE NMS Flight Software Rev 2.3.4.0 Build 55 -- T. Nolan May  2 2013 14:54:51
00000: watchdog_task: initialized
00000: telem_task: initialized
00000: basic_task: initialized
00000: autoexec.bas $Revision: 100 $
00000: useq_task: AMUX table not found
00000: useq_task: initialized
00000: qms: loaded 150 mass table entries (old style) from file mt10811.dat
00000: qms: 7 bands loaded from file bt20111012a.dat
00000: qms: initialized
00000: qms: acquisition stopped
00000: alarm_task: 131 limit definitions loaded from file FlightLim1.4.dat.
00000: alarm_task: initialized
00000: hss_receiver: initialized
00000: hss_task: old time=0, new time=449705210
00002: lc: 131 channel entries, 131 enabled, 0 alarmed, alarm level=0
00002: Digital Status Interval Set To:	5
00002: qms.telem mode = 1
00002: malloc: 1245500 of 1310720 bytes allocated
00002: NMS is up!
00012: Loaded $Id: STS_exo_L3A_3x5x10_v01.bas 324 2013-10-15 18:10:26Z lab $ $Revision: 324 $
00012: sys.marker: id=1, txt=<  $Id: STS_exo_L3A_3x5x10_v01.bas 324 2
00012: Loaded SCI_main.bas $Revision: 351 $
00015: qms temperature compensation enabled
00015: SCI_main.bas $Revision: 351 $
00015: lc: 131 channel entries, 131 enabled, 0 alarmed, alarm level=0
00015: No Pressure Check
00015: qms.telem mode = 3
00016: qms: IP time=2470 setup=30
00016: Task Name: Possible Lunar Gases
00016: qms: IP time=2470 setup=30
00016: sys.marker: id=2, txt=    < restore STS_SCRIPT
00016: sys.marker: id=3, txt=    < Possible Lunar Gases
00019: Task Name: Electronic Background
00022: qms: IP time=270 setup=30
00024: sys.marker: id=4, txt=    < CS_FIL_ON
00024: sys.marker: id=5, txt= > BCO-FIL-t995-f2-m2-v2800-e200-i30 47
00047: qms: IP time=2470 setup=30
00048: sys.marker: id=6, txt= > BCO-TBL-t1005-f2-m2-v2800-e200-i250
00074: Task Name:  Level 2 5x10 peak top
00075: ScanTableFunction: Command = -2 ScnVecReps deaulting to max
00081: sys.marker: id=7, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00139: sys.marker: id=8, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00196: sys.marker: id=9, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00253: sys.marker: id=10, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00310: sys.marker: id=11, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00368: sys.marker: id=12, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00425: sys.marker: id=13, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00482: sys.marker: id=14, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00539: sys.marker: id=15, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00597: sys.marker: id=16, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00654: sys.marker: id=17, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00711: sys.marker: id=18, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00768: sys.marker: id=19, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250
00826: sys.marker: id=20, txt= > CSN-TBL-t1016-f2-m2-v2800-e200-i250