Data Set Summary ================ Data Set ID: ULY-J-EPAC-4-SUMM-PRTL2-FLUX-1HR-V1.0 Instrument: EPAC Instrument P.I.: Erhard Keppler Data Supplier: Erhard Keppler Data sampling rate: 1 hour Data Set Start time: 1992-01-25T00:00:00.000Z Data Set Stop time: 1992-02-28T23:00:00.000Z Naming convention ----------------- Data files in this data set are named according to the convention: Tyyddd.TAB where yy = the last two digits of the year ('92' for 1992) ddd = the day of the year covered by the file Record format ------------- These files can be read according to the FORTRAN format statement: '(a24,8(1x,1pe12.5))' where 'a24' is the time stamp in PDS format: yyyy-mm-ddThh:mm:ss.sssZ. The individual elements of the time field can be read according to the statement: '(i4,4(1x,i2),1x,f6.3,1x)' year, month, day, hour, minute, seconds. thus a record may be alternatively be read according to the format: '(i4,4(1x,i2),1x,f6.3,1x,8(1x,1pe12.5))' Data column descriptions ------------------------ time a24 spacecraft event time prtl2 sector data -- 8 1pe12.5 format proton flux values for each of sectors 1-8 of Proton-Rate Sectored Telescope 2 (~500-1000 keV) Missing data flag value ----------------------- Any data column whose value is -9.99999e+10 is a missing data value. Data Description ================ EPAC RECORD FORMAT (REFERENCE: [KEPPLERETAL1992A] page 322, table 4) UDS REPRESENTATIVE: M. BRUNS (NSP::LINMPI::LINAX1::BRUNS) NOTES: UDS data files ============== These are ASCII files. The data entries in the files are always single precision float values containing one hour averages in Flux / (s cm**2 sr) starting at midnight for each day. The corresponding times are integers indicating start of average. The entries are separated by blanks. Then the total length of the ASCII records are: 130 Bytes with 24 records per file. Bad or absent data are flagged with -9.99999e+10. The data entries are: Proton-Rate Sectored (~500-1000 keV) Telescope 2 Sector 1-8 (PRTL2) The record structure is as follows: 1 character string (24 Bytes) with the format yyyy-mm-ddThh:mm:ss.sssZ yyyy = year mm = month dd = day hh = hours mm = minutes ss.sss = seconds 8 reals (13 Bytes, e.g. -1.23456E+03) for PRTL2 (8 sectors)