geometry_stop_time_utc in Geometry_​Orbiter

Name: geometry_stop_time_utcVersion Id: 1.0.0.0
Description: The pair of geometry_start_time_utc/geometry_stop_time_utc may be given in the label for any observation. The pair is generally used for fairly long duration observations (a substantial portion of an hour to several hours). geometry_stop_time_utc gives the time at the end of the observation. When either geometry_start_time_utc or geometry_stop_time_utc is given, both must be provided. Within the Geometry discipline, there are two options for providing geometric parameters as a range of values. A parameter may be given as a pair where the parameter values are those at the beginning and end of the observation (start_parameter, stop_parameter). If a (start_parameter, stop_parameter) pair is used for any geometric parameter, the pair (geometry_start_time_utc/geometry_stop_time_utc) must be given. Another option to provide geometric parameters as a pair is (minimum_parameter, maximum_parameter) defining a range of values where the values are the minimum and maximum values of that parameter for the entire observation. Comments within the label should be used to ensure the parameter vs. time association is unambiguous.
Namespace Id: geomSteward: geoClass Name: Geometry_​OrbiterType: ASCII_​Date_​Time_​YMD_​UTC
Minimum Value: NoneMaximum Value: NoneMinimum Characters: NoneMaximum Characters: None
Unit of Measure Type: NoneDefault Unit Id: NoneAttribute Concept: NoneConceptual Domain: SHORT_STRING
Status: ActiveNillable: falsePattern: None
Permissible Value(s)No Values