Data Set Overview : The Juno MWR RDR data sets will ultimately include all calibrated MWR  science data for the entire Juno mission. This volume will contain  only those data obtained through the orbital phase of the Juno mission,  when this phase of the mission is completed. These data comprise the  calibrated and geolocated data that address the primary objectives of  the Juno mission. They consist of data obtained at the full MWR data rate during a five-hour period around each perijove pass, and data  obtained at all other times for the purpose of instrument calibration and performance monitoring. This volume contains all instrumental data required for further processing to achieve the scientific  objectives of the Juno mission. The RDR files are of two types: Instrument Reduced Data Records (IRDRs), and Geolocation Data Records  (GRDRs). These have a one-to-one correspondence with each  other as well as with the EDR files. These files comprise the data of primary usefulness to the wider  scientific community. Parameters : The fundamental unit of this data set comprises the data obtained  during a single 100-ms observation made by the MWR instrument. Each  observation includes all of the MWR instrument parameters required  for its calibration, which have been interpolated from neighboring  records in the original EDRs.  Processing : The data included in this volume set were processed by the RDR processing pipeline as described in section 2.3 of the VOLSIS document found under the DOCUMENTS subdirectory. In short, this segment of the pipeline consists of programs which interpolate the instrument  parameters in the EDR records required for the calibration of each record, and then performs that calibration to produce the IRDRs. The  SPICE toolkit and Juno mission SPICE kernels from the Navigation and  Ancillary Information Facility (NAIF) are then used to produce the  associated GRDRs.  Data : Products in this data set consist of files of time-ordered data  corresponding to observations of 100-ms duration each. These are  received from the instrument in time-contiguous units of ten  observations each, with one unit then corresponding to one second's  worth of observation. Successive units may be contiguous in time (full  data rate) or separated by n seconds each (reduced data rate). These  units are then assembled into contiguous files of one hour length  regardless of data rate. Each IRDR and GRDR file has its associated  label file, which in total comprise one data record. The details of the  collection and formatting of these files is described in Sections 2 and  3, and in Appendix B, of the VOLSIS document found under the DOCUMENTS  subdirectory. Ancillary Data : This data set is complete and requires no further data to produce  calibrated antenna temperatures. However, antenna pattern knowledge is  required for use in an antenna pattern correction to produce calibrated  brightness temperatures. Coordinate Systems : Coordinate systems are consistent with those used in SPICE. The  instrument coordinant system is further described in section 2.4.6 of  the VOLSIS document found under the DOCUMENTS subdirectory. The GRDR  locations use the j2000 and galactic coordinant systems found in SPICE. Software : No software is provided to view, interpret, or convert this data set. All files are in ASCII format, however, and are readily readible  through standard programs such as textedit, Microwave Excel and Word,  etc.   Media/Format : This data set is provided to the Planetary Data System by the Juno  Science Operation Center (JSOC) as described in section 5.2 of the  VOLSIS document found under the DOCUMENTS subdirectory.