Data Set Overview
      =================
      The Juno MWR EDR data set will ultimately include all uncalibrated MWR
      science data records for the entire Juno mission. This volume will
      contain only those data obtained through the cruise phase of the Juno
      mission, when this phase of the mission is completed. The objective for
      these data is to provide calibration for the MWR instrument; however,
      it is anticipated that these data may someday be useful for
      astrophysics. This volume consists of reformatted and uncalibrated data
      records. The reformatting operation reassembles received instrument
      data packets into one-hour-long records of time-ordered data
      corresponding to 100-ms observations made by the MWR instrument. This
      data set is intended to preserve the full content of the uncalibrated
      instrument packets and is to be used only as a last resort.  The level
      3 MWR archived data are designed to be complete and more easily used.

      The primary usefulness of these data lay in preserving the inputs to
      higher level calibrated data sets so that such sets may be regenerated
      in the event that better calibrations become available or in the event
      that mistakes are uncovered in the data processing pipelines.  In
      either event the MWR instrument team is intended as the user of these
      data, *not* the wider scientific community.


      Parameters
      ==========
      The fundamental unit of this data set comprises the data obtained
      during a single 100-ms observation made by the MWR instrument. Each
      observation does not include all of the MWR instrument parameters
      required for its calibration, some of which must be interpolated from
      neighboring observations. Actually producing calibrated data from these
      raw data requires detailed knowledge of the MWR instrument.


      Processing
      ==========
      The data included in this volume were processed by the EDR processing
      pipeline as described in section 2.3 of the VOLSIS document found under
      the DOCUMENTS subdirectory.  In short, this pipeline consists of
      programs which reassemble fragmented packets, decompress packets and
      check for CRC errors.


      Data
      ====
      Products in this data set consist of files of time-ordered data
      corresponding to observations of 100-ms duration each. These are
      received from the instrument in time-contiguous units of ten
      observations each, with one unit then corresponding to one second's
      worth of observation. Successive units may be contiguous in time (full
      data rate) or separated by n seconds each (reduced data rate). These
      units are then assembled into contiguous files of one hour length
      regardless of data rate. Each IRDR and GRDR file has its associated
      label file, which in total comprise one data record. The details of the
      collection and formatting of these files is described in Sections 2 and
      3, and in Appendix B, of the VOLSIS document found under the DOCUMENTS
      subdirectory.


      Ancillary Data
      ==============
      This data set is complete, although the generation of higher level
      calibrated data from this raw data set requires the SPICE toolkit
      and Juno mission SPICE kernels from the Navigation and Ancillary
      Information Facility (NAIF) along with calibration data from pre-launch
      measurements and cruise.


      Coordinate Systems
      ==================
      As these are raw data they are recorded without reference to any
      coordinate system.  Pointing information is contained in the level 3
      data (specifically, in the geolocation reduced data records, or GRDRs).


      Software
      ========
      No software is provided to view, interpret, or convert this data set.
      All files are in ASCII format, however, and are readily readible
      through standard programs such as textedit, Microwave Excel and Word,
      etc.


      Media/Format
      ============
      This data set is provided to the Planetary Data System by the Juno
      Science Operation Center (JSOC) as described in section 5.2 of the
      VOLSIS document found under the DOCUMENTS subdirectory.

Confidence Level Overview
      =========================
      This data set contains all instrument packets for the Juno MWR
      experiment for the interval described in the labels for the
      individual product files.  Every effort has been made to ensure that
      all data returned to the Juno Science Operations Center from the
      spacecraft are included, even those packets which fail checksum tests.


      Review
      ======
      The MWR raw complete data will be reviewed internally by the Juno
      MWR instrument team prior to release to the PDS.  The data set will
      also be reviewed by the PDS.


      Data Coverage and Quality
      =========================
      TBD


      Limitations
      ===========
      Limitations on the data set may be defined as the MWR team gains
      experience operating the instrument in flight conditions. No
      limitations are presently known.