DATA_SET_DESCRIPTION |
Data Set Overview
=================
This data set contains raw flash-mode spectra from Near
Infrared Spectrometer #1 on the LCROSS spacecraft.
During the final moments of the LCROSS mission, NSP2
looked toward the sun to capture absorption spectra as
the spacecraft passed through the ejecta and vapor cloud
left by the centaur impact.
Unlike the other spectra and images, flash mode data is
in table files containing multiple spectra taken at 72
Hz (in this dataset). There is one of these table files
per payload data collection period where NSP2 flash mode
was used. This dataset also contains table files
holding housekeeping data.
Related Data Sets
=================
This dataset contains uncalibrated spectra. The
NSP2_FL_CAL dataset contains the corresponding
calibrated spectra. It's described in
NSP2_FL_CAL_DS.CAT in this directory.
NSP2_RAW_DS.CAT and NSP2_CAL_DS.CAT describe data taken
from this spectrometer in its high-resolution 'hadamard'
mode.
Parameters
==========
Science
-------
The data collection period is 72 Hz.
Housekeeping
------------
Instrument temperature at the data collection time is
reported in the label file under:
INSTRUMENT_TEMPERATURE and
INSTRUMENT_TEMPERATURE_COUNT in degrees Centigrade
and raw counts, respectively. This is a single
telemetry point most representative of the
instrument chassis temperature.
Processing
==========
Each near-infrared spectra was digitally transmitted
from the spectrometer to the spacecraft in its raw
format, inserted into a packet uncompressed and
downlinked in telemetry. On the ground, the spectra
were extracted from telemetry, and they were converted
to CSV format. For each data collection period, the
LCROSS Make Archive program read these files and wrote
them as a PDS-formatted table (.TAB) and label (.LBL)
file.
Data
====
The files in this dataset are PDS-formatted, ascii,
tables with detached label files.
Coordinate System
=================
TBD
Software
========
The GSEOS Version used to generate these spectra is GSEOS
5.2.407 (Feb 25, 2008), Python 2.2.3 (#37, Nov 28, 2003,
04:20:20), Project Version 6.1.064.
The LCROSS.py Python script used with GSEOS is Version
Jun 11, 2008.
The LCROSS Report Generator used on GSEOS created
CCSDS.dat files is version 114.
The version of Satellite Toolkit used to prepare geometric
information for the labels is 8.1.3.
The LCROSS Make Archive program used to assemble the
PDS-formatted submission is dated 03/14/2010.
|