Data Set Overview
  =================
    The ChemCam SOH data product consists of various state of health
    parameters including the DPU voltages and temperatures, Mast Unit (MU)
    current and temperaturs, as well as status of various data parameters.
 
 
 
  Parameters
  ==========
      ??
 
 
  Processing
  ==========
    This data set uses the Committee On Data Management And
    Computation (CODMAC) data level numbering system. The EDRs are to be
    reconstructed from 'Level 1' or 'Raw Data', which are the
    telemetry packets within the project specific Standard Formatted Data
    Unit (SFDU) record.
 
    CHEMCAM EDRs were generated by the MIPL (Multimission Image Processing
    Laboratory) at JPL under the Operation Products Generation Subsystem.
    The EDRs are raw uncalibrated data reconstructed from telemetry data
    products and formatted according to the Camera EDR/RDR Software Interface
    Specification. Meta-data acquired from the telemetry data headers
    and a meta-data database were used to propagate the PDS label.
 
    RDRs will be produced in succession by the ChemCam Team and formatted
    according to this SIS, the RDR data product will be placed into FEI for
    distribution.
 
 
  Data
  ====
     The data are stored in multiple data files and have been organized by
     data products.
 
     For SOH the data product consist of the following:
     Ancillary Data which includes sclk, tempertures and command paramteres
     and arguments.
     SOH science Data.
 
     An attached PDL Label describes the content of the data file and
     format of the data can be found in referenced .FMT files.
 
  Ancillary Data
  ==============
     Most of the ancillary data needed can be found in the data it self or
     in the label portion of the EDR.
 
 
  Coordinate System
  =================
     ?
 
 
 
 
  Software
  ========
      ?
 
 
 
 
  Media/Format
  ============
      ?

Confidence Level Overview
  =========================
    High-level description of confidence level (reliability, accuracy,
      completeness, etc.)
 
 
 
  Review
  ======
      Describe review processes which the data have undergone, including the
      PDS Peer review.
 
 
 
  Data Coverage and Quality
  =========================
     This is a good place to mention known data gaps and any null values or
      invalid data flags which might be included.
 
`
 
 
  Limitations
  ===========