Data Set Information
DATA_SET_NAME ROSETTA-ORBITER SW RPCMAG 4 CR2 RESAMPLED V3.0
DATA_SET_ID RO-SS-RPCMAG-4-CR2-RESAMPLED-V3.0
NSSDC_DATA_SET_ID
DATA_SET_TERSE_DESCRIPTION
DATA_SET_DESCRIPTION
Data Set Overview:The data from the ROSETTA PLASMA CONSORTIUM (RPC) FluxgateMagnetometer (MAG) was submitted by Ingo Richter (TM) for the RPCMAGteam. The PI of the team is Karl-Heinz Glassmeier.Note that this is the first version archived for this dataset.Version 1 was never archived.The data have been measured in the time intervals -June 1, 2005 RPC was switched on for a S/W patch . -JUNE 16, 2005 - JUNE 21,2005 Her we intended to search for the trail of Comet Catalina. Unfortunately the data are corrupted, as the instrument did not power on in the right way. The OB Sensor was saturated. -October 3, 2005 This was the Passive Checkout #1 (PC1). -February 15, 2006 Here only HK data are available, as RPC was switched on only for a LAP S/W patch. -February 23, 2006 Here only HK data are available, as RPC was switched on only for a LAP S/W patch. -February 24, 2006 Here only HK data are available, as RPC was switched on only for a LAP S/W patch. -March 7, 2006 This was the Passive Checkout #2 (PC2). -June 4, 2006 - June 8, 2006 These data cover the encounter of the ion tail of Comet 45P/HONDA-MRKOSAll magnetic field data are calibrated, resampled data. That means thedata represent the 3 components of the magnetic field measured inphysical units (nT). Calibration has been applied according to theGround calibration results which means:- temperature dependent offset calibration- temperature dependent sensitivity calibration- temperature dependent misalignment calibrationData are given in different coordinates, dependent on thecalibration LEVEL. LEVEL_F : averaged data in s/c-coordinates Source of these data are either LEVEL_B or LEVEL_K data. LEVEL_G : averaged data in ECLIPJ2000-coordinates Source of these data are either LEVEL_C or LEVEL_L data. LEVEL_H : averaged data in ECLIPJ2000-coordinates, Reaction wheel influence eliminated, Data available for disturbed times only Source of these data are either LEVEL_C or LEVEL_L data. LEVEL_K : Lander heater current influence corrected data in s/c-coordinates, Data available for disturbed times only Source of these data are LEVEL_B data. LEVEL_L : Lander heater current influence corrected data in ECLIPJ2000-coordinates, Data available for disturbed times only. Source of these data are LEVEL_C data.Bad vectors have been removed. Any s/c caused residual magneticfields are not eliminated. The ground temperature model for thesensor calibration has been improved (expanded for a widertemperature range down to - 130 deg C) using long term temperaturemodel obtained from flight data.The data are sorted by the sensor (OB: outboard sensor, IB:inboard sensor) and the measurement mode (M1..M6) and averageinterval (A,where n denotes the average interval in seconds).Data can uniquely be identified by their file names. Averagingmeans calculating a mean value of of the specified interval intime domain. It does not mean any mixing of data from the OB andIB sensor.Normally the OB is the Primary (Pri) and the IB is the Secondary(Sec) sensor However, this order can be toggled by TCs. Thisfeature has been tested especially and only during thecommissioning phases.In cases were the PRIMARY and SECONDARY sensor were toggled theindividual data files (OB/IB) will contain data measured withdifferent sampling rates according to the actual sampling rates ofthe PRIMARY and SECONDARY sensors. Refer to the MODE DESCRIPTIONtable below. The actual sampling rate is the only indicatorshowing which sensor is the primary and which is the secondaryone.LEVEL_H data were only generated if the signature of the Reactionwheel rotations showed up in the calibrated data. A correctioncould be achieved for only for higher frequently sampled data. Forsample rates below one Hertz the disturbing spectrum of theReaction Wheels can hardly be distinguished from the backgroundspectrum. Therefore only burst and medium mode data are corrected.Mode description::MODE SAMPLE RATE PACKET PERIOD PACKET LENGTH VECTOR RATEMinimum Mode M1 1/32 Hz 1024 s 32 Pri Vec 0.03125 vec/s 1 Sec Vec 0.000976 vec/sNormal Mode M2 1 Hz 32 s 32 Pri Vec 1 vec/s 1 Sec Vec 0.03125 vec/sBurst Mode M3 20 Hz 16 s 320 Pri Vec 20 vec/s 16 Sec Vec 1 vec/sMedium Mode M4 5 Hz 32 s 160 Pri Vec 5 vec/s 1 Sec Vec 0.03125 vec/sLow Mode M5 0.25 Hz 128 s 32 Pri Vec 0.25 vec/s 1 Sec Vec 0.007812 vec/sTest Mode M6 20 Hz 16 s 320 Pri Vec 20 vec/s 1 Sec Vec 0.0625 vec/sHK Mode 32 s 8 words 0.03125 vec/sFILENAME CONVENTION & Mode Coding:Due to operational constraints it might happen that the instrumentmode or the primary sensor has to be switched during a specificobservation.The actual mode and the primary sensor of the instrument can easilybe identified by analyzing the filename of the actual data files. Thecomplete filename convention is listed in the EAICD, chapter 3.1.4.The filenames for RESAMPLED averaged data (CLE,CLF,CLG,CLI) are codedas follows: ___A.RPCMAG yymmdd CLE IB A60 LBL CLF OB TAB CLG CLIExample: RPCMAG040528_CLG_OB_A20.LBL RPCMAG040528_CLG_OB_A20.TABAverage denotes the time interval for one average period in seconds.The filenames for RESAMPLED Heater or Reaction Wheel influenced data(CLK, CLL, CLH) are coded as follows: ___.RPCMAG yymmddThhmm CLK IB M1..M6 LBL CLL OB TAB CLIExample: RPCMAG040528T1230_CLK_OB_M3.LBL RPCMAG040528T1230_CLK_OB_M3.TABGeometry Information - Coordinate System:The geometry items SC_SUN_POSITION_VECTOR SC_TARGET_POSITION_VECTOR SC_TARGET_VELOCITY_VECTORprovided in the label of the data product are relative to theECLIPJ2000 frame. This reference frame is built up by EclipticCoordinates related to Equinox of Epoch J2000.Orientation: X: Pointing from SUN to Vernal Equinoxe, Y: perpendicular to X in Ecliptic Plane, Z: Perpendicular to Ecliptic plane, pointing upThe items SUB_SPACECRAFT_LATITUDE SUB_SPACECRAFT_LONGITUDEare given in the PLANETOCENTRIC coordinate system.All these geometry parameters are computed at time t:START_TIME.Distances are given in km, angles in degrees.
DATA_SET_RELEASE_DATE 2009-12-01T00:00:00.000Z
START_TIME 2005-06-01T12:30:54.000Z
STOP_TIME 2006-07-08T11:54:43.000Z
MISSION_NAME INTERNATIONAL ROSETTA MISSION
MISSION_START_DATE 1995-03-01T12:00:00.000Z
MISSION_STOP_DATE N/A (ongoing)
TARGET_NAME CHECKOUT
TARGET_TYPE UNKNOWN
INSTRUMENT_HOST_ID RO
INSTRUMENT_NAME ROSETTA PLASMA CONSORTIUM - FLUXGATE MAGNETOMETER
INSTRUMENT_ID RPCMAG
INSTRUMENT_TYPE MAGNETOMETER
NODE_NAME Small Bodies
ARCHIVE_STATUS SUPERSEDED
CONFIDENCE_LEVEL_NOTE
This dataset has been reviewed by two independent review teams in autumn 2008. After these reviews the dataset has been accepted by the Planetary Science Archive(PSA) of the ESA and by the Planetary Data System (PDS) of NASA for the longterm archiving. The data have been processed on best effort base according to the procedures described in RO-IGEP-TR0028: Step by Step Calibration Procedure. Quality flags are attached for CALIBRATED and RESAMPLED data as described in the EAICD RO-IGEP-TR0009.
CITATION_DESCRIPTION Richter, I., Glassmeier, K.H., Eichelberger. H,ROSETTA RPCMAG CRUISE 2 RESAMPLED DATA RECORD V3.0, RO-SS-RPCMAG-4-CR2-RESAMPLED-V3.0, PDS, 2009
ABSTRACT_TEXT This dataset contains RESAMPLED DATA of the CRUISE 2 phase (CR2).(Version 3.0 is the first version archived.)
PRODUCER_FULL_NAME INGO RICHTER
SEARCH/ACCESS DATA
  • SBN Comet Website