Schematron using XPath 2.0
//rings:Occultation_Ring_Profile/Rule
If rings:occultation_type is set to radio, you must specify the DSN receiving station number.
//rings:Occultation_Ring_Profile/Rule
If rings:occultation_type is set to radio, you must specify the frequency band.
//rings:Occultation_Ring_Profile/Rule
If rings:occultation_type is set to stellar, you must identify the star using the star_name attribute.
//rings:Occultation_Ring_Profile/Rule
You must identify the wavelength of the observation either as a single value using rings:wavelength,
or as a range using the minimum-maximum wavelength pair.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_wavelength and rings:maximum_wavelength, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_wavelength and rings:maximum_wavelength, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
You must specify either the radial sampling interval, or the pair minimum and maximum radial sampling interval.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_radial_sampling_interval and rings:maximum_radial_sampling_interval, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_radial_sampling_interval and rings:maximum_radial_sampling_interval, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:sclk_stop_time and rings:sclk_stop_time, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_subsolar_azimuth and rings:maximum_subsolar_azimuth, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_observed_event_time and rings:maximum_observed_event_time, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_observed_event_time and rings:maximum_observed_event_time, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:observed_event_start_time_utc and rings:observed_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:observed_event_start_time_utc and rings:observed_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:observed_event_start_tdb and rings:observed_event_stop_tdb, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:observed_event_start_tdb and rings:observed_event_stop_tdb, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:spacecraft_event_start_time_utc and rings:spacecraft_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:spacecraft_event_start_time_utc and rings:spacecraft_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:ring_event_start_time_utc and rings:ring_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:ring_event_start_time_utc and rings:ring_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:ring_event_start_tdb and rings:ring_event_stop_tdb, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:ring_event_start_tdb and rings:ring_event_stop_tdb, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:earth_received_start_time_utc and rings:earth_received_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:earth_received_start_time_utc and rings:earth_received_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_ring_radius and rings:maximum_ring_radius, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_ring_radius and rings:maximum_ring_radius, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_inertial_ring_longitude and rings:maximum_inertial_ring_longitude, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_inertial_ring_longitude and rings:maximum_inertial_ring_longitude, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_corotating_ring_longitude and rings:maximum_corotating_ring_longitude, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_corotating_ring_longitude and rings:maximum_corotating_ring_longitude, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_observed_ring_azimuth and rings:maximum_observed_ring_azimuth, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_observed_ring_azimuth and rings:maximum_observed_ring_azimuth, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
You must identify the observed ring elevation of the observation ( [-90,90] degrees) either as a single value using rings:observed_ring_elevation,
or as a range using the minimum-maximum observed ring elevation pair.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_observed_ring_elevation and rings:maximum_observed_ring_elevation, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_observed_ring_elevation and rings:maximum_observed_ring_elevation, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_light_source_incidence_angle and rings:maximum_light_source_incidence_angle, are a pair; if you use one, you must use both.
//rings:Occultation_Ring_Profile/Rule
rings:minimum_light_source_incidence_angle and rings:maximum_light_source_incidence_angle, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
If rings:occultation_type is set to radio, you must specify the DSN receiving station number.
//rings:Occultation_Time_Series/Rule
If rings:occultation_type is set to radio, you must specify the frequency band.
//rings:Occultation_Time_Series/Rule
If rings:occultation_type is set to stellar, you must identify the star using the star_name attribute.
//rings:Occultation_Time_Series/Rule
You must identify the wavelength of the observation either as a single value using rings:wavelength,
or as a range using the minimum-maximum wavelength pair.
//rings:Occultation_Time_Series/Rule
rings:minimum_wavelength and rings:maximum_wavelength, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_wavelength and rings:maximum_wavelength, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:sclk_stop_time and rings:sclk_stop_time, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_subsolar_azimuth and rings:maximum_subsolar_azimuth, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_observed_event_time and rings:maximum_observed_event_time, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_observed_event_time and rings:maximum_observed_event_time, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:observed_event_start_time_utc and rings:observed_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:observed_event_start_time_utc and rings:observed_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:observed_event_start_tdb and rings:observed_event_stop_tdb, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:observed_event_start_tdb and rings:observed_event_stop_tdb, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:spacecraft_event_start_time_utc and rings:spacecraft_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:spacecraft_event_start_time_utc and rings:spacecraft_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:ring_event_start_time_utc and rings:ring_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:ring_event_start_time_utc and rings:ring_event_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:ring_event_start_tdb and rings:ring_event_stop_tdb, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:ring_event_start_tdb and rings:ring_event_stop_tdb, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:earth_received_start_time_utc and rings:earth_received_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:earth_received_start_time_utc and rings:earth_received_stop_time_utc, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_ring_radius and rings:maximum_ring_radius, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_ring_radius and rings:maximum_ring_radius, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_inertial_ring_longitude and rings:maximum_inertial_ring_longitude, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_inertial_ring_longitude and rings:maximum_inertial_ring_longitude, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_corotating_ring_longitude and rings:maximum_corotating_ring_longitude, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_corotating_ring_longitude and rings:maximum_corotating_ring_longitude, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_observed_ring_azimuth and rings:maximum_observed_ring_azimuth, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_observed_ring_azimuth and rings:maximum_observed_ring_azimuth, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
You must identify the observed ring elevation of the observation ( [-90,90] degrees) either as a single value using rings:observed_ring_elevation,
or as a range using the minimum-maximum observed ring elevation pair.
//rings:Occultation_Time_Series/Rule
rings:minimum_observed_ring_elevation and rings:maximum_observed_ring_elevation, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_observed_ring_elevation and rings:maximum_observed_ring_elevation, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_light_source_incidence_angle and rings:maximum_light_source_incidence_angle, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
rings:minimum_light_source_incidence_angle and rings:maximum_light_source_incidence_angle, are a pair; if you use one, you must use both.
//rings:Occultation_Time_Series/Rule
If rings:sigma_projected_star_diameter is used, you must also provide a value for rings:projected_star_diameter.
//rings:Occultation_Time_Series/Rule
If rings:projected_star_diameter is used, you must also provide a value for rings:sigma_projected_star_diameter.
//rings:Occultation_Time_Series/Rule
If rings:sigma_time_constant is used, you must also specify a value for rings:time_constant.
//rings:Occultation_Time_Series/Rule
If rings:time_constant is used, you must also specify a value for rings:sigma_time_constant.
//rings:Occultation_Time_Series/Rule
If rings:time_constant is used, you must also specify a value for rings:time_constant_type.
//rings:Occultation_Time_Series/Rule
If rings:time_constant_type is used, you must also specify a value for rings:time_constant.
//rings:Reprojection_Geometry/Rule
rings:minimum_radial_resolution and rings:maximum_radial_resolution, are a pair; if you use one, you must use both.
//rings:Reprojection_Geometry/Rule
rings:minimum_radial_resolution and rings:maximum_radial_resolution, are a pair; if you use one, you must use both.
//rings:Reprojection_Geometry/Rule
rings:minimum_longitudinal_resolution and rings:maximum_longitudinal_resolution, are a pair; if you use one, you must use both.
//rings:Reprojection_Geometry/Rule
rings:minimum_longitudinal_resolution and rings:maximum_longitudinal_resolution, are a pair; if you use one, you must use both.
//rings:Ring_Model/rings:Central_Body_Parameters/Rule
You must supply the reference radius, rings:grav_ref_radius, associated with the gravitational harmonic coefficient.
//rings:Ring_Model/rings:Central_Body_Parameters/Rule
You must supply the reference radius, rings:grav_ref_radius, associated with the gravitational harmonic coefficient.
//rings:Ring_Model/rings:Central_Body_Parameters/Rule
You must supply the reference radius, rings:grav_ref_radius, associated with the gravitational harmonic coefficient.
//rings:Ring_Model/rings:Central_Body_Parameters/Rule
You must supply the reference radius, rings:grav_ref_radius, associated with the gravitational harmonic coefficient.
//rings:Ring_Reprojection/pds:Local_Internal_Reference/Rule
For Local_Internal_Reference in rings:Ring_Reprojection, local_reference_type must equal 'reprojection_to_array'.
//rings:Ring_Reprojection/rings:Reprojection_Geometry/Rule
You must supply the corotation rate, rings:corotation_rate, associated with the corotating frame.
//rings:Ring_Spectrum/Rule
You must identify the wavelength of the observation either as a single value using rings:wavelength,
or as a range using the minimum-maximum wavelength pair.
//rings:Ring_Spectrum/Rule
rings:minimum_wavelength and rings:maximum_wavelength, are a pair; if you use one, you must use both.
//rings:Ring_Spectrum/Rule
rings:minimum_wavelength and rings:maximum_wavelength, are a pair; if you use one, you must use both.
//rings:Uniformly_Sampled_Radius/Rule
rings:sampling_base is only used when the value of rings:sampling_scale is either logarithmic, or exponential.
//rings:Uniformly_Sampled_Radius/pds:Local_Internal_Reference/Rule
For Local_Internal_Reference in rings:Uniformly_Sampled_Radius, local_reference_type must equal 'uniformly_sampled_radius_to_array_axis'.
rings:Central_Body_Parameters/rings:gmass/rings:gmass
The attribute @unit must be equal to one of the following values 'km**3/s**2'.
rings:Central_Body_Parameters/rings:grav_ref_radius/rings:grav_ref_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Central_Body_Parameters/rings:pole_declination_angle/rings:pole_declination_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Central_Body_Parameters/rings:pole_declination_angle_uncert/rings:pole_declination_angle_uncert
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Central_Body_Parameters/rings:pole_right_ascension_angle/rings:pole_right_ascension_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Central_Body_Parameters/rings:pole_right_ascension_angle_uncert/rings:pole_right_ascension_angle_uncert
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Column_Headers/rings:earth_received_time/rings:earth_received_time
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Column_Headers/rings:emission_angle/rings:emission_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Column_Headers/rings:maximum_sub_stellar_clock_angle/rings:maximum_sub_stellar_clock_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Column_Headers/rings:maximum_sub_stellar_ring_azimuth/rings:maximum_sub_stellar_ring_azimuth
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Column_Headers/rings:minimum_sub_stellar_clock_angle/rings:minimum_sub_stellar_clock_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Column_Headers/rings:minimum_sub_stellar_ring_azimuth/rings:minimum_sub_stellar_ring_azimuth
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Column_Headers/rings:observed_event_tdb/rings:observed_event_tdb
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Column_Headers/rings:observed_event_time/rings:observed_event_time
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Column_Headers/rings:observed_ring_azimuth/rings:observed_ring_azimuth
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Column_Headers/rings:phase_angle/rings:phase_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Column_Headers/rings:projected_sun_diameter/rings:projected_sun_diameter
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Column_Headers/rings:ring_event_tdb/rings:ring_event_tdb
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Column_Headers/rings:ring_event_time/rings:ring_event_time
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Column_Headers/rings:ring_radius/rings:ring_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Column_Headers/rings:spacecraft_event_time/rings:spacecraft_event_time
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Normal_Mode_Parameters/rings:normal_mode_amplitude/rings:normal_mode_amplitude
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Normal_Mode_Parameters/rings:normal_mode_amplitude_uncert/rings:normal_mode_amplitude_uncert
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Normal_Mode_Parameters/rings:normal_mode_pattern_speed/rings:normal_mode_pattern_speed
The attribute @unit must be equal to one of the following values 'deg/day', 'deg/s', 'rad/s'.
rings:Normal_Mode_Parameters/rings:normal_mode_pattern_speed_uncert/rings:normal_mode_pattern_speed_uncert
The attribute @unit must be equal to one of the following values 'deg/day', 'deg/s', 'rad/s'.
rings:Normal_Mode_Parameters/rings:normal_mode_phase/rings:normal_mode_phase
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Normal_Mode_Parameters/rings:normal_mode_phase_uncert/rings:normal_mode_phase_uncert
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:along_track_timing_offset/rings:along_track_timing_offset
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Ring_Profile/rings:data_quality_index/rings:data_quality_index
The attribute rings:Occultation_Ring_Profile/rings:data_quality_index must be equal to one of the following values '0', '1', '2', '3', '4', '5', '6', 'B', 'F', 'R', 'U', 'X'.
rings:Occultation_Ring_Profile/rings:data_quality_score/rings:data_quality_score
The attribute rings:Occultation_Ring_Profile/rings:data_quality_score must be equal to one of the following values 'Fair', 'Good', 'Poor'.
rings:Occultation_Ring_Profile/rings:frequency_band/rings:frequency_band
The attribute rings:Occultation_Ring_Profile/rings:frequency_band must be equal to one of the following values 'C', 'D', 'E', 'F', 'G', 'H', 'K', 'Ka', 'Ku', 'Q', 'R', 'S', 'U', 'V', 'W', 'X', 'Y'.
rings:Occultation_Ring_Profile/rings:fresnel_scale/rings:fresnel_scale
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Ring_Profile/rings:light_source_incidence_angle/rings:light_source_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:maximum_corotating_ring_longitude/rings:maximum_corotating_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:maximum_inertial_ring_longitude/rings:maximum_inertial_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:maximum_light_source_incidence_angle/rings:maximum_light_source_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:maximum_observed_event_time/rings:maximum_observed_event_time
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Ring_Profile/rings:maximum_observed_ring_azimuth/rings:maximum_observed_ring_azimuth
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:maximum_observed_ring_elevation/rings:maximum_observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:maximum_radial_sampling_interval/rings:maximum_radial_sampling_interval
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Ring_Profile/rings:maximum_ring_radius/rings:maximum_ring_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Ring_Profile/rings:minimum_corotating_ring_longitude/rings:minimum_corotating_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:minimum_inertial_ring_longitude/rings:minimum_inertial_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:minimum_light_source_incidence_angle/rings:minimum_light_source_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:minimum_observed_event_time/rings:minimum_observed_event_time
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Ring_Profile/rings:minimum_observed_ring_azimuth/rings:minimum_observed_ring_azimuth
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:minimum_observed_ring_elevation/rings:minimum_observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:minimum_radial_sampling_interval/rings:minimum_radial_sampling_interval
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Ring_Profile/rings:minimum_ring_radius/rings:minimum_ring_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Ring_Profile/rings:observed_event_start_tdb/rings:observed_event_start_tdb
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Ring_Profile/rings:observed_event_stop_tdb/rings:observed_event_stop_tdb
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Ring_Profile/rings:observed_ring_elevation/rings:observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:occultation_direction/rings:occultation_direction
The attribute rings:Occultation_Ring_Profile/rings:occultation_direction must be equal to one of the following values 'Both', 'Egress', 'Ingress', 'Multiple'.
rings:Occultation_Ring_Profile/rings:occultation_type/rings:occultation_type
The attribute rings:Occultation_Ring_Profile/rings:occultation_type must be equal to one of the following values 'Radio', 'Solar', 'Stellar'.
rings:Occultation_Ring_Profile/rings:planetary_occultation_flag/rings:planetary_occultation_flag
The attribute rings:Occultation_Ring_Profile/rings:planetary_occultation_flag must be equal to one of the following values 'N', 'Y'.
rings:Occultation_Ring_Profile/rings:projected_star_diameter/rings:projected_star_diameter
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Ring_Profile/rings:radial_resolution/rings:radial_resolution
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Ring_Profile/rings:radial_sampling_interval/rings:radial_sampling_interval
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Ring_Profile/rings:ring_detected/rings:ring_detected
The attribute rings:Occultation_Ring_Profile/rings:ring_detected must be equal to one of the following values 'N', 'Y'.
rings:Occultation_Ring_Profile/rings:ring_event_start_tdb/rings:ring_event_start_tdb
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Ring_Profile/rings:ring_event_stop_tdb/rings:ring_event_stop_tdb
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Ring_Profile/rings:ring_plane/rings:ring_plane
The attribute rings:Occultation_Ring_Profile/rings:ring_plane must be equal to one of the following values 'A', 'B', 'C', 'D', 'E', 'Equator', 'F', 'G', 'Phoebe', 'alpha', 'beta', 'delta', 'epsilon', 'eta', 'five', 'four', 'gamma', 'individual', 'lambda', 'mu', 'nu', 'six'.
rings:Occultation_Ring_Profile/rings:ring_profile_direction/rings:ring_profile_direction
The attribute rings:Occultation_Ring_Profile/rings:ring_profile_direction must be equal to one of the following values 'Egress', 'Ingress', 'Multiple'.
rings:Occultation_Ring_Profile/rings:sigma_projected_star_diameter/rings:sigma_projected_star_diameter
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Ring_Profile/rings:sigma_time_constant/rings:sigma_time_constant
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Ring_Profile/rings:sub_stellar_clock_angle/rings:sub_stellar_clock_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:sub_stellar_ring_azimuth/rings:sub_stellar_ring_azimuth
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Ring_Profile/rings:time_constant/rings:time_constant
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Ring_Profile/rings:time_constant_type/rings:time_constant_type
The attribute rings:Occultation_Ring_Profile/rings:time_constant_type must be equal to one of the following values 'Double Pole', 'None', 'Single Pole'.
rings:Occultation_Supplement/rings:frequency_band/rings:frequency_band
The attribute rings:Occultation_Supplement/rings:frequency_band must be equal to one of the following values 'C', 'D', 'E', 'F', 'G', 'H', 'K', 'Ka', 'Ku', 'Q', 'R', 'S', 'U', 'V', 'W', 'X', 'Y'.
rings:Occultation_Supplement/rings:maximum_observed_event_time/rings:maximum_observed_event_time
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Supplement/rings:minimum_observed_event_time/rings:minimum_observed_event_time
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Supplement/rings:occultation_direction/rings:occultation_direction
The attribute rings:Occultation_Supplement/rings:occultation_direction must be equal to one of the following values 'Both', 'Egress', 'Ingress', 'Multiple'.
rings:Occultation_Supplement/rings:occultation_type/rings:occultation_type
The attribute rings:Occultation_Supplement/rings:occultation_type must be equal to one of the following values 'Radio', 'Solar', 'Stellar'.
rings:Occultation_Supplement/rings:planetary_occultation_flag/rings:planetary_occultation_flag
The attribute rings:Occultation_Supplement/rings:planetary_occultation_flag must be equal to one of the following values 'N', 'Y'.
rings:Occultation_Supplement/rings:ring_profile_direction/rings:ring_profile_direction
The attribute rings:Occultation_Supplement/rings:ring_profile_direction must be equal to one of the following values 'Egress', 'Ingress', 'Multiple'.
rings:Occultation_Time_Series/rings:along_track_timing_offset/rings:along_track_timing_offset
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Time_Series/rings:data_quality_index/rings:data_quality_index
The attribute rings:Occultation_Time_Series/rings:data_quality_index must be equal to one of the following values '0', '1', '2', '3', '4', '5', '6', 'B', 'F', 'R', 'U', 'X'.
rings:Occultation_Time_Series/rings:data_quality_score/rings:data_quality_score
The attribute rings:Occultation_Time_Series/rings:data_quality_score must be equal to one of the following values 'Fair', 'Good', 'Poor'.
rings:Occultation_Time_Series/rings:frequency_band/rings:frequency_band
The attribute rings:Occultation_Time_Series/rings:frequency_band must be equal to one of the following values 'C', 'D', 'E', 'F', 'G', 'H', 'K', 'Ka', 'Ku', 'Q', 'R', 'S', 'U', 'V', 'W', 'X', 'Y'.
rings:Occultation_Time_Series/rings:fresnel_scale/rings:fresnel_scale
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Time_Series/rings:light_source_incidence_angle/rings:light_source_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:maximum_corotating_ring_longitude/rings:maximum_corotating_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:maximum_inertial_ring_longitude/rings:maximum_inertial_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:maximum_light_source_incidence_angle/rings:maximum_light_source_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:maximum_observed_event_time/rings:maximum_observed_event_time
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Time_Series/rings:maximum_observed_ring_azimuth/rings:maximum_observed_ring_azimuth
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:maximum_observed_ring_elevation/rings:maximum_observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:maximum_projected_sun_diameter/rings:maximum_projected_sun_diameter
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Time_Series/rings:maximum_ring_radius/rings:maximum_ring_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Time_Series/rings:minimum_corotating_ring_longitude/rings:minimum_corotating_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:minimum_inertial_ring_longitude/rings:minimum_inertial_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:minimum_light_source_incidence_angle/rings:minimum_light_source_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:minimum_observed_event_time/rings:minimum_observed_event_time
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Time_Series/rings:minimum_observed_ring_azimuth/rings:minimum_observed_ring_azimuth
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:minimum_observed_ring_elevation/rings:minimum_observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:minimum_projected_sun_diameter/rings:minimum_projected_sun_diameter
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Time_Series/rings:minimum_ring_radius/rings:minimum_ring_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Time_Series/rings:observed_event_start_tdb/rings:observed_event_start_tdb
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Time_Series/rings:observed_event_stop_tdb/rings:observed_event_stop_tdb
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Time_Series/rings:observed_ring_elevation/rings:observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:occultation_direction/rings:occultation_direction
The attribute rings:Occultation_Time_Series/rings:occultation_direction must be equal to one of the following values 'Both', 'Egress', 'Ingress', 'Multiple'.
rings:Occultation_Time_Series/rings:occultation_type/rings:occultation_type
The attribute rings:Occultation_Time_Series/rings:occultation_type must be equal to one of the following values 'Radio', 'Solar', 'Stellar'.
rings:Occultation_Time_Series/rings:planetary_occultation_flag/rings:planetary_occultation_flag
The attribute rings:Occultation_Time_Series/rings:planetary_occultation_flag must be equal to one of the following values 'N', 'Y'.
rings:Occultation_Time_Series/rings:projected_star_diameter/rings:projected_star_diameter
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Time_Series/rings:ring_event_start_tdb/rings:ring_event_start_tdb
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Time_Series/rings:ring_event_stop_tdb/rings:ring_event_stop_tdb
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Time_Series/rings:ring_plane/rings:ring_plane
The attribute rings:Occultation_Time_Series/rings:ring_plane must be equal to one of the following values 'A', 'B', 'C', 'D', 'E', 'Equator', 'F', 'G', 'Phoebe', 'alpha', 'beta', 'delta', 'epsilon', 'eta', 'five', 'four', 'gamma', 'individual', 'lambda', 'mu', 'nu', 'six'.
rings:Occultation_Time_Series/rings:sigma_projected_star_diameter/rings:sigma_projected_star_diameter
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Time_Series/rings:sigma_projected_sun_diameter/rings:sigma_projected_sun_diameter
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Occultation_Time_Series/rings:sigma_time_constant/rings:sigma_time_constant
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Time_Series/rings:sub_stellar_clock_angle/rings:sub_stellar_clock_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:sub_stellar_ring_azimuth/rings:sub_stellar_ring_azimuth
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Occultation_Time_Series/rings:time_constant/rings:time_constant
The attribute @unit must be equal to one of the following values 'day', 'hr', 'julian day', 'microseconds', 'min', 'ms', 'ns', 's', 'yr'.
rings:Occultation_Time_Series/rings:time_constant_type/rings:time_constant_type
The attribute rings:Occultation_Time_Series/rings:time_constant_type must be equal to one of the following values 'Double Pole', 'None', 'Single Pole'.
rings:Occultation_Time_Series/rings:time_series_direction/rings:time_series_direction
The attribute rings:Occultation_Time_Series/rings:time_series_direction must be equal to one of the following values 'Both', 'Egress', 'Ingress', 'Multiple'.
rings:Reprojection_Geometry/rings:corotating_flag/rings:corotating_flag
The attribute rings:Reprojection_Geometry/rings:corotating_flag must be equal to one of the following values 'N', 'Y'.
rings:Reprojection_Geometry/rings:corotation_rate/rings:corotation_rate
The attribute @unit must be equal to one of the following values 'deg/day', 'deg/s', 'rad/s'.
rings:Reprojection_Geometry/rings:maximum_corotating_ring_longitude/rings:maximum_corotating_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:maximum_emission_angle/rings:maximum_emission_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:maximum_incidence_angle/rings:maximum_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:maximum_inertial_ring_longitude/rings:maximum_inertial_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:maximum_observed_ring_elevation/rings:maximum_observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:maximum_phase_angle/rings:maximum_phase_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:maximum_ring_radius/rings:maximum_ring_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Reprojection_Geometry/rings:mean_emission_angle/rings:mean_emission_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:mean_incidence_angle/rings:mean_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:mean_observed_ring_elevation/rings:mean_observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:mean_phase_angle/rings:mean_phase_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:minimum_corotating_ring_longitude/rings:minimum_corotating_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:minimum_emission_angle/rings:minimum_emission_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:minimum_incidence_angle/rings:minimum_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:minimum_inertial_ring_longitude/rings:minimum_inertial_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:minimum_observed_ring_elevation/rings:minimum_observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:minimum_phase_angle/rings:minimum_phase_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Geometry/rings:minimum_ring_radius/rings:minimum_ring_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Reprojection_Geometry/rings:reprojection_plane/rings:reprojection_plane
The attribute rings:Reprojection_Geometry/rings:reprojection_plane must be equal to one of the following values 'A', 'B', 'C', 'D', 'E', 'Equator', 'F', 'G', 'Laplace', 'Phoebe', 'alpha', 'beta', 'delta', 'epsilon', 'eta', 'five', 'four', 'gamma', 'lambda', 'mu', 'nu', 'six'.
rings:Reprojection_Grid_Parameters/rings:longitudinal_resolution/rings:longitudinal_resolution
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Grid_Parameters/rings:maximum_longitudinal_resolution/rings:maximum_longitudinal_resolution
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Grid_Parameters/rings:maximum_radial_resolution/rings:maximum_radial_resolution
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Reprojection_Grid_Parameters/rings:mean_longitudinal_resolution/rings:mean_longitudinal_resolution
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Grid_Parameters/rings:mean_radial_resolution/rings:mean_radial_resolution
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Reprojection_Grid_Parameters/rings:minimum_longitudinal_resolution/rings:minimum_longitudinal_resolution
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Grid_Parameters/rings:minimum_radial_resolution/rings:minimum_radial_resolution
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Reprojection_Grid_Parameters/rings:radial_resolution/rings:radial_resolution
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Reprojection_Grid_Parameters/rings:reprojection_grid_longitudinal_sampling_interval/rings:reprojection_grid_longitudinal_sampling_interval
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Reprojection_Grid_Parameters/rings:reprojection_grid_radial_sampling_interval/rings:reprojection_grid_radial_sampling_interval
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Moon_Systems/Rule
If "rings:Ring_Reprojection" or "rings:Ring_Spectrum" is specified, a "disp:Display_Direction" must be specified, as well.
rings:Ring_Orbital_Elements/rings:fit_rms_semimajor/rings:fit_rms_semimajor
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Orbital_Elements/rings:inclination/rings:inclination
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Orbital_Elements/rings:inclination_uncert/rings:inclination_uncert
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Orbital_Elements/rings:nodal_regression_rate/rings:nodal_regression_rate
The attribute @unit must be equal to one of the following values 'deg/day', 'deg/s', 'rad/s'.
rings:Ring_Orbital_Elements/rings:nodal_regression_rate_method/rings:nodal_regression_rate_method
The attribute rings:Ring_Orbital_Elements/rings:nodal_regression_rate_method must be equal to one of the following values '0', '1', '2'.
rings:Ring_Orbital_Elements/rings:nodal_regression_rate_uncert/rings:nodal_regression_rate_uncert
The attribute @unit must be equal to one of the following values 'deg/day', 'deg/s', 'rad/s'.
rings:Ring_Orbital_Elements/rings:node_longitude/rings:node_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Orbital_Elements/rings:node_longitude_uncert/rings:node_longitude_uncert
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Orbital_Elements/rings:periapse_longitude/rings:periapse_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Orbital_Elements/rings:periapse_longitude_uncert/rings:periapse_longitude_uncert
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Orbital_Elements/rings:periapse_precession_rate/rings:periapse_precession_rate
The attribute @unit must be equal to one of the following values 'deg/day', 'deg/s', 'rad/s'.
rings:Ring_Orbital_Elements/rings:periapse_precession_rate_method/rings:periapse_precession_rate_method
The attribute rings:Ring_Orbital_Elements/rings:periapse_precession_rate_method must be equal to one of the following values '0', '1', '2'.
rings:Ring_Orbital_Elements/rings:periapse_precession_rate_uncert/rings:periapse_precession_rate_uncert
The attribute @unit must be equal to one of the following values 'deg/day', 'deg/s', 'rad/s'.
rings:Ring_Orbital_Elements/rings:semimajor_axis/rings:semimajor_axis
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Orbital_Elements/rings:semimajor_axis_uncert/rings:semimajor_axis_uncert
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:corotating_ring_longitude/rings:corotating_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:emission_angle/rings:emission_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:incidence_angle/rings:incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:inertial_ring_longitude/rings:inertial_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:light_source_incidence_angle/rings:light_source_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:maximum_corotating_ring_longitude/rings:maximum_corotating_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:maximum_emission_angle/rings:maximum_emission_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:maximum_incidence_angle/rings:maximum_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:maximum_inertial_ring_longitude/rings:maximum_inertial_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:maximum_light_source_incidence_angle/rings:maximum_light_source_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:maximum_observed_ring_elevation/rings:maximum_observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:maximum_phase_angle/rings:maximum_phase_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:maximum_radial_resolution/rings:maximum_radial_resolution
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:maximum_radial_sampling_interval/rings:maximum_radial_sampling_interval
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:maximum_ring_intercept_resolution/rings:maximum_ring_intercept_resolution
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:maximum_ring_longitude_observed_minus_subsolar/rings:maximum_ring_longitude_observed_minus_subsolar
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:maximum_ring_radius/rings:maximum_ring_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:mean_observed_ring_elevation/rings:mean_observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:mean_phase_angle/rings:mean_phase_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:minimum_corotating_ring_longitude/rings:minimum_corotating_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:minimum_emission_angle/rings:minimum_emission_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:minimum_incidence_angle/rings:minimum_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:minimum_inertial_ring_longitude/rings:minimum_inertial_ring_longitude
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:minimum_light_source_incidence_angle/rings:minimum_light_source_incidence_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:minimum_observed_ring_elevation/rings:minimum_observed_ring_elevation
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:minimum_phase_angle/rings:minimum_phase_angle
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:minimum_radial_resolution/rings:minimum_radial_resolution
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:minimum_radial_sampling_interval/rings:minimum_radial_sampling_interval
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:minimum_ring_intercept_resolution/rings:minimum_ring_intercept_resolution
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:minimum_ring_longitude_observed_minus_subsolar/rings:minimum_ring_longitude_observed_minus_subsolar
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Ring_Spectrum/rings:minimum_ring_radius/rings:minimum_ring_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:radial_resolution/rings:radial_resolution
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:radial_sampling_interval/rings:radial_sampling_interval
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:ring_intercept_resolution/rings:ring_intercept_resolution
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Ring_Spectrum/rings:ring_longitude_observed_minus_subsolar/rings:ring_longitude_observed_minus_subsolar
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Satellite_Parameters/rings:gmass/rings:gmass
The attribute @unit must be equal to one of the following values 'km**3/s**2'.
rings:Satellite_Parameters/rings:inclination/rings:inclination
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Satellite_Parameters/rings:inclination_uncert/rings:inclination_uncert
The attribute @unit must be equal to one of the following values 'arcmin', 'arcsec', 'deg', 'hr', 'microrad', 'mrad', 'rad'.
rings:Satellite_Parameters/rings:semimajor_axis/rings:semimajor_axis
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Satellite_Parameters/rings:semimajor_axis_uncert/rings:semimajor_axis_uncert
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Uniformly_Sampled_Radius/rings:first_ring_radius/rings:first_ring_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Uniformly_Sampled_Radius/rings:last_ring_radius/rings:last_ring_radius
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Uniformly_Sampled_Radius/rings:sampling_interval_length/rings:sampling_interval_length
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Uniformly_Sampled_Radius/rings:sampling_scale/rings:sampling_scale
The attribute rings:Uniformly_Sampled_Radius/rings:sampling_scale must be equal to one of the following values 'Exponential', 'Linear', 'Logarithmic'.
rings:Wavelength_Parameters/rings:maximum_wavelength/rings:maximum_wavelength
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Wavelength_Parameters/rings:minimum_wavelength/rings:minimum_wavelength
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.
rings:Wavelength_Parameters/rings:wavelength/rings:wavelength
The attribute @unit must be equal to one of the following values 'AU', 'Angstrom', 'cm', 'km', 'm', 'micrometer', 'mm', 'nm'.