Search Results
1–50 of 211 results (0.001 seconds)
-
collection:
Apollo 17 Surface Electrical Properties Experiment Calibrated ASCII Data - Document Collection
This collection contains supporting documentation for the Apollo 17 Surface Electrical Properties Experiment Calibrated ASCII Data Bundle. It includes a bundle description document that describes the calibrated ASCII data products in the data collection and the contents of this document collection. This document collection includes a high-resolution digital reproduction (microfiche scans) of the final technical report for the Apollo 17 Surface Electrical Properties Experiment. The report contains plots of the complete set of processed lunar field data, as dB values versus range, at six measured frequencies from 1.0 to 32.1 MHz for the time span of 11-13 December 1972. The three-part report is provided as three PDF/A files. -
collection:
Lunar Reconnaissance Orbiter Diviner Calibrated Data Collection 2
Lunar Reconnaissance Orbiter Diviner Calibrated Data Collection for data collected starting 01-01-2017 -
collection:
LCROSS Near Infrared Spectrometer 1 Data Collection
This collection contains data products for the Near Infrared Spectrometer 1 instrument of the LCROSS spacecraft. -
collection:
Trang 2020 Lunar Space Weathering Maps Data Collection
Lunar Space Weathering Maps Data Collection by David Trang -
collection:
Apollo 17 ALSEP ARCSAV Lunar Surface Gravimeter Raw Cleaned ASCII Data Collection (1975-092 to 1975-181)
This collection contains fixed-width ASCII files of daily raw cleaned science measurements acquired by the Lunar Surface Gravimeter (LSG) at the Apollo 17 landing site for the time span of 02 April through 30 June 1975. These data were extracted from NASA's original Apollo Lunar Surface Experiments Package (ALSEP) archive tapes, also known as ARCSAV tapes, that recorded 24-hour, time-edited, and rearranged raw binary data transmitted from the Moon. The extracted binary data were corrected for obvious tape read errors then transformed to ASCII format for this archive. This collection also includes ASCII files of LSG-related command verification and raw analog housekeeping data extracted from the ARCSAV binary files. -
collection:
Lunar Reconnaissance Orbiter LOLA RDR Gridded Data Collection
LRO LOLA RDR Gridded Data Collection -
collection:
Lunar Prospector Calibrated MAG Document Collection
This collection contains Lunar Prospector ASCII tables of 1 day duration in Selenocentric Solar Ecliptic (SSE) and Selenographic (SEL) coordinates. This collection also contains selected and filtered time series data at 5 second intervals. -
collection:
data_derived collection for the "LADEE LUNAR DUST EXPERIMENT" bundle
This is the data_derived collection for the ladee_ldex bundle. This archive bundle includes data taken by the Lunar Dust Experiment (LDEX) instrument aboard the Lunar Atmosphere and Dust Environment Explorer (LADEE) spacecraft. These data are generated by dust impacts on the LDEX detector. Both reduced and calibrated data are included in this bundle. -
collection:
Lunar Prospector MAG Derived Document Collection
This collection contains Lunar Prospector Magnetometer (MAG) Derived Data including Regional Field Maps at the spacecraft altitude and Large-Scale Vector Field Maps at a Common Altitude of 37 km. -
collection:
Apollo 12 ALSEP ARCSAV SIDE/CCIG Raw Cleaned ASCII Data Collection (1975-093 to 1975-182)
This collection contains fixed-width ASCII files of daily raw cleaned science and engineering measurements acquired by the Suprathermal Ion Detector Experiment (SIDE) and the Cold Cathode Ion Gage Experiment (CCIG; also known as the Cold Cathode Gage Experiment for the time span of 03 April through 01 July 1975. These data were extracted from NASA's original Apollo Lunar Surface Experiments Package (ALSEP) archive tapes, also known as ARCSAV tapes, that recorded 24-hour, time-edited, and rearranged raw binary data transmitted from the Moon. The extracted binary data were corrected for obvious tape read errors then transformed to ASCII format for this archive. This collection also includes one ASCII file of SIDE/CCIG-related command verification data extracted from the ARCSAV binary files. -
collection:
Apollo 15 ALSEP ARCSAV SIDE/CCIG Raw Cleaned ASCII Data Collection (1975-092 to 1975-181)
This collection contains fixed-width ASCII files of daily raw cleaned science and engineering measurements acquired by the Suprathermal Ion Detector Experiment (SIDE) and the Cold Cathode Ion Gage Experiment (CCIG; also known as the Cold Cathode Gage Experiment for the time span of 02 April through 30 June 1975. These data were extracted from NASA's original Apollo Lunar Surface Experiments Package (ALSEP) archive tapes, also known as ARCSAV tapes, that recorded 24-hour, time-edited, and rearranged raw binary data transmitted from the Moon. The extracted binary data were corrected for obvious tape read errors then transformed to ASCII format for this archive. This collection also includes one ASCII file of SIDE/CCIG-related command verification data extracted from the ARCSAV binary files. -
collection:
LRO LEND Derived Science Data Collection
Lunar Reconnaissance Orbiter LEND derived science data -
collection:
Lunar Reconnaissance Orbiter Diviner Global High-Resolution Mosaic (GHRM) Browse Collection
Lunar Reconnaissance Orbiter Diviner Global High-Resolution Mosaic Browse Collection -
collection:
Arizona State University Ronald Greeley Center for Planetary Studies - The Ronald Greeley 35mm Slide Collection, The Jovian System, The Jovian System Bodies and Miscellaneous Objects
This collection, included in document_jovian_system_and_misc, consists of 245 digitized 35mm slides of Jovian System bodies and miscellaneous objects. Slides are divided into two databases, diagrams and photos, but are inventoried as a single collection. Information about each photograph, including location, description, and mission, are in the document_database in jovian_system_and_misc_diagram_database.pdf and jovian_system_and_misc_photo_database.pdf. The photographs and documentation are from the Dr. Ronald Greeley archive at the Arizona State University Ronald Greeley Center for Planetary Studies, Tempe, Arizona. -
collection:
Document collection for Arizona State University Ronald Greeley Center for Planetary Studies - The Ronald Greeley 35mm Slide Collection, The Jovian System, Ganymede
This collection, included in document_ganymede, consists of 108 digitized 35mm slides primarily of Ganymede, Galilean Satellite of Jupiter, and other related bodies. Slides are divided into two databases, diagrams and photos, but are inventoried as a single collection. Information about each photograph, including location, description, and mission, are in the document_database in ganymede_diagram_database.pdf and ganymede_photo_database.pdf. The photographs and documentation are from the Dr. Ronald Greeley archive at the Arizona State University Ronald Greeley Center for Planetary Studies, Tempe, Arizona. -
collection:
Hayabusa2 Optical Navigation Camera (ONC) Raw Data Collection
This collection contains the raw science data products produced by Optical Navigation Camera (ONC) onboard the Hayabusa2 spacecraft. This product includes Level 2a product of Hayabusa2 ONC processing level. -
collection:
Lunar Prospector Gravity Models as ASCII Collection
This collection contains a set of Lunar gravity models represented as ASCII text. The models were derived by investigators at JPL. -
collection:
LCROSS Photgjon Raw Data Collection
Collection of raw data products for the Photgjon ground-based dataset. -
collection:
Lunar Reconnaissance Orbiter Diviner Raw2 Data Collection
Lunar Reconnaissance Orbiter Diviner Raw Data Collection for data collected starting 2017-01-01 -
collection:
Apollo 16 ALSEP ARCSAV Lunar Surface Magnetometer Raw Cleaned ASCII Document Collection (1975-092 to 1975-181)
This collection contains documentation for the Apollo 16 ALSEP ARCSAV Lunar Surface Magnetometer Raw Cleaned ASCII Data Collection (1975-092 to 1975-181). It includes a description of the raw data products and the Fortran programs used to extract data from raw binary Apollo 16 LSM ARCSAV files and transform to ASCII. -
collection:
Galileo NIMS PDS4 Archive XML Schema Collection
The original Galileo NIMS archived data were originally publicly available but not in a format that was readily accessible by the planetary community. This situation precludes the spectral investigation of surface and atmospheric chemistry and mineralogy for these objects. Several aspects of the NIMS data archive contribute to this circumstance, including VAX formatted data files (a platform and format abandoned by the PDS), a challenging radiometric calibration, and the absence of a rigorous camera/sensor model, and/or data products that have been orthorectified or spatially controlled relative to SSI observations or more recent Cassini data products (e.g., VIMS). NIMS data are also not easily accessible by the planetary community. Before this work, NIMS data were only compatible with ISIS2, a program no longer supported by the USGS and no longer functions on some modern computer operating systems (e.g., Apple OS X). Galileo NIMS data were also not compatible with mainstream planetary software, including ENVI/IDL or ISIS3. This effort transitioned the data set to ISIS3 and thereby ISIS3 support interfaces. The NIMS PDS archive contains tube and g-cube data derived from the EDRs. Considering the relatively small scope of this effort only the NIMS tube and g-cube product data are the focus of this work. The objective of this work is to reformat and re-archive the Galileo NIMS data set into a more easily accessible data format. In order to do this we outlined three basic objectives: Objective 1: Create an ISIS3 application that reads and converts the NIMS data cubes into native ISIS3 cubes. NIMS data in the PDS is stored in VAX FLOAT format which is mostly obsolete and not widely used in the community any longer. This objective would ential adding support for conversion of VAX FLOAT to IEEE FLOAT in ISIS; advantageous to the pursuit is existing code in ISIS2 that provided a basis for this work. Here we also sought to seek out problems with the NIMS labels in PDS archive that are not compliant with PDS4 standards. These labels errors are to then be corrected and exported with properly formed labels to the PDS archive. Objective 2: Provide the ability to project NIMS tubes using the existing NIMS latitude, longitude tube backplanes. Objective 3: Derivation of a PDS4 compliant archive of the results of our study and provide it to the PDS for general distribution. These basic initial steps will make NIMS more user friendly and provide active support through ISIS help interfaces. -
collection:
Trang 2020 Lunar Space Weathering Maps Browse Collection
Lunar Space Weathering Maps Browse Collection by David Trang -
collection:
Chandrayaan-1 mini-RF Mosaic Collection
This bundle contains Chandrayaan-1 Mini-SAR (also called Mini-RF Forerunner) lunar science products. This collection contains data processed into mosaic derived products. -
collection:
Lunar Reconnaissance Orbiter Diviner Derived Data Document Collection
LRO Diviner Derived Data Document Collection -
collection:
Apollo 12 ALSEP ARCSAV SIDE/CCIG Raw Cleaned ASCII Document Collection (1975-093 to 1975-182)
This collection contains documentation for the Apollo 12 ALSEP SIDE/CCIG Raw Cleaned ASCII Data Collection (1975-093 to 1975-182). It includes a description of the raw data products and the Fortran programs used to extract data from raw binary Apollo 12 SIDE/CCIG ARCSAV files and transform to ASCII. It also includes a one-page sheet of SIDE calibration data. -
collection:
Apollo 15 ALSEP ARCSAV Heat Flow Experiment Calibrated Gradient Bridge Temperatures Collection (1975-092 to 1975-181)
This collection contains fixed-width ASCII files contains fully processed, calibrated temperature data for the upper and lower gradient bridges (thermal sensors) on both probes of the Heat Flow Experiment (HFE) at the Apollo 15 landing site. The time span is 02 April through 30 June 1975. These data were derived from raw measurements extracted from NASA's original Apollo Lunar Surface Experiments Package (ALSEP) archive tapes, also known as ARCSAV tapes. -
collection:
Apollo 12 ALSEP ARCSAV Solar Wind Spectrometer Raw Cleaned ASCII Data Collection (1975-093 to 1975-182)
This collection contains fixed-width ASCII files of daily raw cleaned science measurements and daily raw calibration and engineering data acquired by the Solar Wind Spectrometer (SWS) at the Apollo 12 landing site for the time span of 03 April through 01 July 1975. These data were extracted from NASA's original Apollo Lunar Surface Experiments Package (ALSEP) archive tapes, also known as ARCSAV tapes, that recorded 24-hour, time-edited, and rearranged raw binary data transmitted from the Moon. The extracted binary data were corrected for obvious tape read errors then transformed to ASCII format for this archive. This collection also includes one ASCII file of SWS-related command verification data extracted from the ARCSAV binary files. -
collection:
Hayabusa2 Optical Navigation Camera (ONC) Co-registered Radiance Factor (I/F) Data Collection
This collection contains the derived co-registered radiance factor (I/F) science data products produced by Optical Navigation Camera (ONC) onboard the Hayabusa2 spacecraft. This product includes L2drc product of Hayabusa2 ONC processing level. -
collection:
Apollo 17 ALSEP ARCSAV Heat Flow Experiment Raw Cleaned ASCII Document Collection (1975-092 to 1975-181)
This collection contains documentation for the Apollo 17 ALSEP ARCSAV Heat Flow Experiment Raw Cleaned ASCII Data Collection (1975-092 to 1975-181). It includes a description of the raw data products and the Fortran programs used to extract data from raw binary Apollo 17 HFE ARCSAV files and transform to ASCII. -
collection:
MINI-RF Global Mosaics 100mpp Browse Collection
Mini-RF Global Mosaics 100mpp resolution -
collection:
Lunar Prospector GRS Elemental Abundance Browse Collection
This collection contains browse products for elemental abundance derived from analyses of Lunar Prospecter Gamma Ray data. -
collection:
Apollo Passive Seismic Experiment Expanded Event Catalog Data Collection
Apollo Passive Seismic Experiment Expanded Event Catalog. -
collection:
Lunar Prospector ER 3-D Electron Flux Ancillary Data Collection
This collection contains the table lists times and information about data gaps or outages in Lunar Prospector merged telemetry files. As well as the spectra data collected over the 16 spin periods providing the polar angle of the detector as it steps within each spectrum. -
collection:
LRO LEND Reduced Science Data Collection
Lunar Reconnaissance Orbiter LEND reduced science data -
collection:
Lunar Prospector Trajectory Data Collection
This collection contains table of positions and velocities of the Lunar Prospector spacecraft as a function of time, expressed in several coordinate systems provided in 1 month ASCII tables. -
collection:
Apollo 17 ALSEP ARCSAV Lunar Ejecta And Meteorites Experiment Raw Cleaned ASCII Data Collection (1975-092 to 1975-181)
This collection contains fixed-width ASCII files of daily raw cleaned science measurements acquired by the Lunar Ejecta And Meteorites (LEAM) Experiment at the Apollo 17 landing site for the time span of 02 April through 30 June 1975. These data were extracted from NASA's original Apollo Lunar Surface Experiments Package (ALSEP) archive tapes, also known as ARCSAV tapes, that recorded 24-hour, time-edited, and rearranged raw binary data transmitted from the Moon. The extracted binary data were corrected for obvious tape read errors then transformed to ASCII format for this archive. This collection also includes ASCII files of LEAM-related command verification and raw analog housekeeping data extracted from the ARCSAV binary files. -
collection:
Lunar Reconnaissance Orbiter LOLA Raw Data Collection
Lunar Reconnaissance Orbiter LOLA Raw Data Collection -
collection:
Apollo 17 Surface Electrical Properties Experiment Calibrated ASCII Data Collection
This collection two comma-delimited ASCII files of calibrated lunar surface electromagnetic field data at six measured frequencies from 1.0 to 32.1 MHz and navigation (range) data from the Surface Electrical Properties (SEP) Experiment at the Apollo 17 landing site for the time span of 11-13 December 1972. One file contains straightened science and navigation (range) data; the other file contains only unstraightened science data. These data were extracted from binary files held on magnetic tape at the NASA Space Science Data Coordinated Archive as data set PSPG-00559, then reformatted to ASCII. The bundle description in the document collection describes the format of these ASCII data products. -
bundle:
Galileo NIMS PDS4 Archive
The original Galileo NIMS archived data were originally publicly available but not in a format that was readily accessible by the planetary community. This situation precludes the spectral investigation of surface and atmospheric chemistry and mineralogy for these objects. Several aspects of the NIMS data archive contribute to this circumstance, including VAX formatted data files (a platform and format abandoned by the PDS), a challenging radiometric calibration, and the absence of a rigorous camera/sensor model, and/or data products that have been orthorectified or spatially controlled relative to SSI observations or more recent Cassini data products (e.g., VIMS). NIMS data are also not easily accessible by the planetary community. Before this work, NIMS data were only compatible with ISIS2, a program no longer supported by the USGS and no longer functions on some modern computer operating systems (e.g., Apple OS X). Galileo NIMS data were also not compatible with mainstream planetary software, including ENVI/IDL or ISIS3. This effort transitioned the data set to ISIS3 and thereby ISIS3 support interfaces. The NIMS PDS archive contains tube and g-cube data derived from the EDRs. Considering the relatively small scope of this effort only the NIMS tube and g-cube product data are the focus of this work. The objective of this work is to reformat and re-archive the Galileo NIMS data set into a more easily accessible data format. In order to do this we outlined three basic objectives: Objective 1: Create an ISIS3 application that reads and converts the NIMS data cubes into native ISIS3 cubes. NIMS data in the PDS is stored in VAX FLOAT format which is mostly obsolete and not widely used in the community any longer. This objective would ential adding support for conversion of VAX FLOAT to IEEE FLOAT in ISIS; advantageous to the pursuit is existing code in ISIS2 that provided a basis for this work. Here we also sought to seek out problems with the NIMS labels in PDS archive that are not compliant with PDS4 standards. These labels errors are to then be corrected and exported with properly formed labels to the PDS archive. Objective 2: Provide the ability to project NIMS tubes using the existing NIMS latitude, longitude tube backplanes. Objective 3: Derivation of a PDS4 compliant archive of the results of our study and provide it to the PDS for general distribution. These basic initial steps will make NIMS more user friendly and provide active support through ISIS help interfaces. -
bundle:
Lunar Prospector GRS/NS Calibrated Spectra Bundle
This bundle contains calibrated gamma ray and neutron spectra obtained by the Lunar Prospector spacecraft. -
bundle:
Apollo 17 ALSEP ARCSAV Heat Flow Experiment Calibrated Gradient Bridge Temperatures Bundle
This bundle contains fixed-width ASCII files contains fully processed, calibrated temperature data for the upper gradient bridge thermal sensors on both probes of the Heat Flow Experiment (HFE) at the Apollo 17 landing site. The time span is 02 April through 30 June 1975. These data were derived from raw measurements extracted from NASA's original Apollo Lunar Surface Experiments Package (ALSEP) archive tapes, also known as ARCSAV tapes. -
bundle:
Watkins 2018 Lunar Boulder Data
The Watkins 2018 Lunar Boulder PDS4 bundle -
bundle:
LCROSS MMT Observatory CLIO Calibrated Data Bundle
This bundle contains contains calibrated data collected from the MMT Observatory CLIO instrument during observations of the impact of the LCROSS spacecraft on the moon on October 9, 2009. The bundle contains raw data products. -
bundle:
Apollo 17 Surface Electrical Properties Experiment Calibrated ASCII Data Bundle
This bundle contains two comma-delimited ASCII files of calibrated lunar surface electromagnetic field and navigation (range) data from the Surface Electrical Properties (SEP) Experiment at the Apollo 17 landing site for the time span of 11-13 December 1972. One file contains straightened science and navigation (range) data; the other file contains only unstraightened science data. These data were extracted from binary files held on magnetic tape at the NASA Space Science Data Coordinated Archive as data set PSPG-00559, then reformatted to ASCII. This bundle also contains a high-resolution digital reproduction of the SEP final technical report that contains plots of the complete set of processed lunar field data, as decibal values versus range, and explanations the data processing and calibration techniques implemented by the SEP instrument team. -
bundle:
Lunar Reconnaissance Orbiter Diviner Raw Data (EDR) Bundle
Lunar Reconnaissance Orbiter Diviner Raw (EDR) Data Products -
bundle:
Chandrayaan-1 Mini-RF Data Bundle
This bundle contains Chandrayaan-1 Mini-SAR (also called Mini-RF Forerunner) lunar science products. This bundle contains data processed from raw through to final derived products. -
bundle:
Apollo 17 ALSEP ARCSAV Lunar Ejecta And Meteorites Experiment Raw Cleaned ASCII Data Bundle
This bundle contains fixed-width ASCII files of daily, raw cleaned measurements acquired by the Lunar Ejecta And Meteorites (LEAM) Experiment at the Apollo 17 landing site for the time span of 02 April through 30 June 1975. These data were extracted from NASA's original Apollo Lunar Surface Experiments Package (ALSEP) archive tapes, also known as ARCSAV tapes. -
bundle:
Clementine 1: Gravity and Topography Model Bundle
This bundle contains gravity and topography models from the Deep Space Program Science Experiment (Clementine-1) mission to the Moon. The bundle also contains documentation which describes the format and processing of the data. -
bundle:
Lunar Reconnaissance Orbiter Diviner Calibrated Data Bundle
Lunar Reconnaissance Orbiter Diviner Calibrated (RDR) Data Products -
bundle:
Arizona State University Ronald Greeley Center for Planetary Studies - The Ronald Greeley 35mm Slide Collection, The Jovian System
This bundle contains the digitized products generated from Dr. Ronald Greeley's 35mm Slide Collection, the Jovian System, housed at the RGCPS, ASU, Tempe, AZ. Included is a User’s Guide for a further description of the products.
Data Sets and Information