STATUS: DONE

MISSION SEQUENCE PLANNER REPORT

SEQUENCE DESCRIPTION

• Sol 9 Scenario

• Sequence 50910B (.pef file, viewable as text)
• Command-by-Command Description (w/telemetry estimate)

• Vehicle Positions:

  	X Position (m)	Y Position (m)	Heading (deg)
  At Sequence Start	4.148	-3.219	216
  At End of Sol 9	4.148	-3.219	216

• Pointing for IMP Images of Rover:

  Image Type	X (m)	Y (m)	Z (m)	Imaging Opportunity

• Telemetry Volume Estimates

  • Sol 9 Sequence Nominal Downlink (by APID) (Predicted telemetry volume generated between activation of sequence 50910B on SOL 9 and nominal abort of sequence on morning of SOL 10):

    APID	Name	Predicted #Pkts	Predicted #Mbits
    4	Health Status	12	0.02794
    5	Ops/Engr	33	0.01690
    6	Sequence Status	5	0.00142
    7	Error Reports	0	0.00000
    8	Science Imaging	0	0.00000
    9	Technology Imaging	0	0.00000
    10	Lander Imaging	0	0.00000
    12	APXS Results	0	0.00000
    23	Priority Ops/Engr.	0	0.00000
    24	Auto Imaging	0	0.00000
    25	Ops Imaging	0	0.00000
    29	Traverse Reporting	0	0.00000
    	TOTAL	50	0.04625

  • 50910B Nominal Sequence until Nominal Abort (by APID)
  • 50910B Full Sequence w/Runout (by APID)
  • 50910B RAIF Comment List (comments appear as skipped commands in telemetry stream)

  • 50910B Nominal Sequence Summary for PLAN-IT

SEQUENCE IMPLEMENTATION REPORT

• SEQUENCE EXECUTION ISSUES:

• SEQUENCE PLAN ASSESSMENT:
  Recommendations for Downlink Assessment Team
  1. None
  Flight Rules Waived:
  1. None
  Macros Modified:
  1. None
  Incorporation of EAT Operational Constraints (this sequence)
  1. Accepted: Enable auto shutdown (to limit battery usage)
  2. Accepted: Move alarm based wakeup to 05:45 LST (every SOL) to account for adverse tilt.
  3. Accepted: Perform Level 3 Health check and persistent state table readout at 07:00 LST and 13:30 LST (every SOL)
  4. Accepted: Do NOT perform night-time health checks
  5. Accepted: Set Modem Heat to 10 minutes
  6. Accepted: Set Modem Reheat to 5 minutes
  7. Accepted: Move up daily Shutdowns to 15:30 LST to account for adverse Tilt.
  8. Accepted: Auto heat WEB to maximum of 35C between 12:00 LST - 15:00 LST.
  9. REJECTED: Sync clock at 15:00 LST (Synch clock is performed at 15:30 LST)
  10. Accepted: Enable "other devices" to use batteries.
  11. Accepted: Perform Level 3 health check at 18:00 LST on Sol 9 only.
  Incorporation of Operational Constraints (General)

SCIENCE/TECHNOLOGY OBJECTIVES REPORT

PRESS RELEASE