Detector

Name: DetectorVersion Id: 1.0.0.0
Description:The Detector class contains attributes describing the state of the instrument detector. These are values directly read from the detector and do not necessarily reflect the state of the image after onboard processing. For example, the entire image may be read into memory and then subframed in software, in which case the subframe attributes in this class reflect the entire image (as read from the detector), whereas those in the Subframe class represent the final subframe results.
Namespace Id: imgSteward: imgRole: TBD_roleStatus: Active
Class Hierarchy: Detector
Attribute(s)NameCardinalityValue
 first_​line0..1None
 first_​sample0..1None
 lines0..1None
 samples0..1None
 detector_​to_​image_​rotation0..1None
 detector_​to_​image_​flip0..1Horizontal, None, Vertical
 erase_​count0..1None
 readout_​rate0..1None
 gain_​mode_​id0..1None
 gain_​number0..1None
 analog_​offset0..1None
 bad_​pixel_​replacement_​flag0..1None
 bad_​pixel_​replacement_​table_​id0..1None
 instrument_​idle_​timeout0..1None
 early_​image_​return0..1None
 parameter_​table_​id0..1None
Association(s)NameCardinalityClass
 ISO0..1ISO
 Special_​Point0..1Special_​Point
 Internal_​Reference0..1Internal_​Reference
Referenced from: Commanded_​Parameters, Imaging, MSSS_​Camera_​Mini_​Header