| Description:The Detector class contains attributes describing the state of the instrument detector. These are values directly read from the detector and do not necessarily reflect the state of the image after onboard processing. For example, the entire image may be read into memory and then subframed in software, in which case the subframe attributes in this class reflect the entire image (as read from the detector), whereas those in the Subframe class represent the final subframe results. |
| Namespace Id: img | Steward: img | Role: TBD_role | Status: Active |
| Class Hierarchy: Detector |
| Attribute(s) | Name | Cardinality | Value |
| | first_line | 0..1 | None |
| | first_sample | 0..1 | None |
| | lines | 0..1 | None |
| | samples | 0..1 | None |
| | detector_to_image_rotation | 0..1 | None |
| | detector_to_image_flip | 0..1 | Horizontal, None, Vertical |
| | erase_count | 0..1 | None |
| | frame_count | 0..1 | None |
| | readout_rate | 0..1 | None |
| | gain_count | 0..1 | None |
| | gain_db | 0..1 | None |
| | gain_mode_id | 0..1 | None |
| | gain_number | 0..1 | None |
| | analog_offset | 0..1 | None |
| | analog_offset_count | 0..1 | None |
| | analog_offset_percent | 0..1 | None |
| | bad_pixel_replacement_flag | 0..1 | None |
| | bad_pixel_replacement_table_id | 0..1 | None |
| | instrument_idle_timeout | 0..1 | None |
| | early_image_return | 0..1 | None |
| | parameter_table_id | 0..1 | None |
| Association(s) | Name | Cardinality | Class |
| | ISO | 0..1 | ISO |
| | Special_Point | 0..1 | Special_Point |
| | Shutter | 0..1 | Shutter |
| | Internal_Reference | 0..1 | Internal_Reference |
| Referenced from: Commanded_Parameters, Imaging, MSSS_Camera_Mini_Header |